User's Manual

E2 Wireless I/O Page 51
Chapter 5 – Diagnostics
5.1 IO Diagnostics
By selecting this option on the main screen
will allow some basic reading and writing of
the I/O store within the module.
To read a location, enter an address
location, e.g. 10001 (for digital Inputs),
enter a count (number of consecutive
registers) and then press the “Read” button
Below the buttons, you will see the returned
address location and values
To Write to outputs , enter the address
location, count and value and then press
the “Write” button.
You will then see the outputs change to the
value you entered.
E.g. Write to Register 1 with a count of 8 and a value of 65535 will turn all the Local
Digital Outputs on.