User's Manual

905U-K Radio Telemetry Module User Manual
 ELPRO Technologies Pty Ltd 2001 Page 2
Thank you for your selection of the 905U-K module for your
telemetry needs. We trust it will give you many years of valuable
service.
ATTENTION!
Incorrect termination of supply wires may
cause internal damage and will void warranty.
To ensure your 905U-K enjoys a long life,
double check ALL your connections with
the user’s manual
before turning the power on.
CAUTION!
For continued against risk of fire, replace the module fuse F1 only with the same type and rating
To comply with FCC RF Exposure requirements in section 1.1310 of the FCC Rules, antennas used with this
device must be installed to provide a separation distance of at least 20 cm from all persons to satisfy RF
exposure compliance.
DO NOT:
• operate the transmitter when someone is within 20 cm of the antenna
• operate the transmitter unless all RF connectors are secure and any open connectors are properly
terminated.
• operate the equipment near electrical blasting caps or in an explosive atmosphere
All equipment must be properly grounded for safe operations. All equipment should be serviced only by a
qualified technician.