User's Manual

905U-K Radio Telemetry Module User Manual
 ELPRO Technologies Pty Ltd 2001 Page 28
4 CONFIGURATION
The 905U-K module is configured by creating a configuration file on a PC and downloading to
the 905U-K via the RS232 serial port. You will require the configuration software, and a
serial cable - refer to the previous section.
The configuration software is supplied as "free-ware" on the Product Catalog CD supplied
with each order. The configuration software for the 905U-K is the same as the software for
the 905U. Please read section 4.3 of the 905U User Manual before proceeding further.
Setup the project name and system address as per the 905U manual. Enter the “units” as per
the manual. Select “905U-K” as the unit type for 905U-K modules.
Each 905U-K has a unit address and a secondary address. Up to eight 905U-K modules can
use the same system address. If you enter the same unit address for more than one 905U-K,
the configuration software will automatically increase the secondary address. The default
description of a 905U-K module is 505-2#10_1 where 10 is the unit address and 1 is the
secondary address. If a unit address of 10 is chosen for another 905U-K module, it will have
a default description of 505-2#10_2. For small systems, select a unique unit address for each
905U-K module.