User's Manual

905U-K Radio Telemetry Module User Manual
 ELPRO Technologies Pty Ltd 2001 Page 32
If either pulse input has an input rate of more than 10Hz, then the Fast Pulse Input option
should be selected from the Pulsed Inputs selection.
If the pulse inputs
are connected to a
shaft encoder
(incremental or
quadrature types),
then the Shaft
Encoder Inputs
option should be
selected.
The pulse inputs
also have a
Sensitivity value. The pulse input sensitivity is the number of pulse increments since the last
transmission to trigger another transmission. For example, if the pulse count at the last
transmission for a pulse input
was 1000, and the sensitivity
value is 10, then another
transmission will occur when
the pulse count reaches 1010
(provided there has not been an
update transmission during this
period). The sensitivity values
can be between 1 and 32000.