User's Manual

905U-K Radio Telemetry Module User Manual



ELPRO Technologies Pty Ltd 2001 Page 34
• Select the unit to be configured from the left-hand menu
• Click on the “Program Unit” button.
You will be asked to confirm if the module already has a different system or unit address.
Each module will need to be programmed individually.
4.9 Loading Configuration from a Module
Care should be taken when loading a configuration from a module. It is easy to lose the
system address and unit address. We suggest that you first view the system address and unit
address - you can do this via the “Unit Options” menu. Note these addresses before loading
the configuration.
When you upload the configuration, the program will check if you want to load the addresses
from the module. If you do not, then the system address and unit address will change.
4.10 Print Options
You can obtain a print-out of each module configuration. On each unit display, there are
“Unit Summary” and “Mapping Summary” windows. Each of these will display a printable
information page about that module. The Unit Summary page will display the user options
configured, and the Mapping Summary will display the mappings entered for that unit.
The printer may be selected from the Printer Setup option in the File menu.