User's Manual

Radio/Serial Telemetry Module User Manual
Page 36 © March 2000
Changing an existing mapping
Select the mapping to change using the mouse or arrow keys, and either press the <ENTER> key,
or click the right mouse button.
Deleting an existing mapping
Select the mapping to delete using the mouse or arrow keys, and press the <DEL> key to delete the
mapping. A message asks for confirmation to ensure mappings are not deleted accidentally.
Configuring Input/Output mapping types
On selecting an Input/Output type mapping, a dialogue box allows entry of the desired mapping.
Depending on the type of unit being configured (-1, -2, or -3), the dialogue box will vary.
The following is the display for configuration of Input/Output mappings on a -1 module. The -2
module has 32 different “inputs”, and the 10GenericName-3 module has only 4 “inputs”.
Item Meaning
Input The input to be mapped.
Output The output (usually at a remote site) at which the signal is to appear.
Destination Address The address of the site where the output is to appear.
Store And Forward The addresses of any intermediate repeater units needed to reach the
destination address (entered in order of nearest to furthermost repeater).
Invert Optional inversion of the signal (-1 and -3 only).