User's Manual

E2-455 User Manual
Page 4 of 14
man_E2-455_V1-7.docx
YU3/400 + CC10/450 0.38 1.07
YU6/400 + CC10/450 0.53 1.51
YU9/400 + CC20/450 0.45 1.27
YU16/400 + CC20/450 0.79 2.26
Limitations and Condition of Use:
ELPRO E2-455 radio module is designed as a reusable module for use with future development of
ELPRO products. The module is limited for use by ELPRO only. This module is not to be made available
for third party use or in any OEM arrangements.
The following requirements apply to any product which incorporates the E2-455 radio module:
The product incorporating the ELPRO E2-455 radio must not include any instructions to remove or
install the E2-455 radio module.
The product incorporating the ELPRO E2-455 radio must be limited to installation in mobile or fixed
application.
A separate approval is required for all other operating configurations, including portable configurations
with respect to Part 2.1093 and different antenna.
Any product incorporating the ELPRO E2-455 radio must include a label on the final product that
indicates the certification numbers for the E2-455 radio. The following must appear on the final product
label:
C1 band
Contains:
FCC ID : O9P-E2-455C1
IC : 3957A-E2455C1
C4 band
Contains:
FCC ID : O9P-E2-455
IC : 3957A-E2455