User Manual

APPENDIX
Page 26 EnergyAxis Gas Module ― User Guide
Elster Integrated Solutions • Draft A Nov. 2007
To Order Additional Spacers
Item Part Number*
A 1/2” Tall spacer for fat post 52807P002
B 7/8” Tall (2 tiered) spacer for thin post 52807P003
C 1/4” Short spacer (all) 52807P004
* Part numbers are subject to change. Be sure to include item description when ordering.
5. Fit the pulser board over the index posts onto spacers:
• Hold index in one hand, face-down.
• Position pulser board so that its circular notches align with
the index posts and the pulser gear faces the index gears.
• Slide the pulser board onto the posts.
• Ensure pulsar gears mate with index gears.
• Ensure the gears mesh smoothly by turning the input
wriggler.
• See assembly illustration below.
Index faceplate
Index posts with
spacers beneath
p
ulse
r
Pulser board
A
TALL
1/2”
(fat post)
C
SHORT
1/4”
(both posts)
B
TALL
7/8”
(thin post)
Pulser board spacer types (2 of each type in kit)
FAT POST
spacer
combo
THIN POST
spacer
combo
A + C B + C