User Manual

CHAPTER 7 TROUBLESHOOTING
EnergyAxis Gas Module ― User Guide Page 27
Elster Integrated Solutions • Draft Rev A Nov. 2007
6. Slip one of the short spacers over the portion of each post
protruding above the pulser board.
7. Route the pulser wires toward the notch cut earlier in the index
box.
• Be sure the wires are not pinched under either the posts or
the spacers.
Put short spacers
on protruding
portion of posts
Pulser board
(front)
Faces toward
index, gears
en
g
a
g
ed
INDEX (back)
INDEX (front)
Pulser board
(back)
Index post
Index p
ost