User's Manual

EA Mobile User Guide
2. Preparation and installation
19
• Use an area below the driver’s line of sight
2. Clean the selected location.
3. Remove the adhesive cover from the holder’s base and securely mount the
holder and the monitor on the selected location of the dashboard.
Option 2 - to a windshield
1. Mount the LCD monitor to its suction windshield holder by sliding monitor
into the mounting stand, then, secure the height position by adjusting knob.
• Choose an area near the driver’s side windshield for the mount.
• Make sure the area does not block the driver’s view of the road when the
touch screen monitor is installed.
• Position the holder in such a way so when monitor installed, the monitor
can be easily reached by the operator when the vehicle is safely parked.
• Use an area below the driver’s line of sight, close to the dashboard.
2. Clean the selected location with the glass cleaner.
3. Remove the protecting film covering the suction cup.
4. Press the suction cup against the flat area of the selected location and use
the release lever to secure the holder.
Connecting the monitor to the EA_Mobile
To connect the touch screen monitor with the EA_Mobile after mounting the
monitor on the dashboard or on the windshield:
1. Connect the power cable to the POWER receptacle on the back of the
monitor (Figure 2-2).
Figure 2-2. EA_Mobile back panel
2. Have a certified vehicle mechanic connect the other end of the direct
connect power cable to the vehicle’s battery post.
3. Connect the LCD monitor to the EA_Mobile by connecting the VGA, Line Out
and USB 1 into the corresponding sockets on the EA_Mobile front panel as
shown in Figure 2-3.