User's Manual

3 QUICK START GUIDE
This chapter provides a streamlined version of the installation and operating
instructions for those who simply wish to set up and begin acquiring endpoint
data quickly on fully automated routes.
Note: This chapter assumes all systems and operations perform
properly and that all meters desired to be read automatically on
the route are equipped with endpoints. For detailed instructions
and troubleshooting tips regarding these and other types of
route conditions, refer to the applicable chapter and section in
the book.
Installing the EA_Mobile 1. Position EA_Mobile with front accessible to operator, and its back and
cooling fan free of obstacles.
2. Secure EA_Mobile properly.
Figure 3-1.
3. Mount transmit and transceiver antennas on top of vehicle at least 2-3 feet
apart.
4. Mount GPS receiver on top of vehicle with flat side down and as horizontal
as possible at least 2-3 feet from antennas.
5. Route antenna cables and GPS cable to inside of vehicle and connect to
proper receptacles on EA_Mobile back.
6. Connect the LCD touch screen monitor to the EA_Mobile. (See “Installing the
EA_Mobile” on page 17 for more details on how to connect the LCD.)
7. Connect the power cable to the receptacle on the back of EA_Mobile and
plug the other end into the vehicle’s accessory/cigarette lighter receptacle.
8. Turn on the LCD monitor.
EA_Mobile front
shown with LCD touch
screen monitor
EA_Mobile back
EA Mobile User Guide