User's Manual

EA Mobile User Guide
3. Quick Start Guide
32
The table below describes the GPS Status Codes and their meaning:
3. You may now begin driving the route.
The EA_Mobile will automatically scan for endpoints within its interrogation
window. You will hear a beep each time the EA_Mobile gets a good
response from a endpoint (unless the “Beep on Good Read” option is turned
off).
In Window Indicates the number of endpoints currently in the
interrogation window. In this example, there are 0
endpoints.
GEO Indicates the number of GEO endpoints in the
interrogation window. In this example, there is no GEO
indicated since the EA_Mobile is not in GEO mode.
Value Description
XX (A numerical value will be displayed)
The GPS receiver is communicating with the EA_Mobile
and is producing valid position data. The value shows the
number of satellites.
- The GPS receiver is not properly communicating with the
EA_Mobile or is not connected.
A The GPS receiver is properly communicating with the
EA_Mobile; however, the GPS is not getting good data
from the satellites or the EA_Mobile is in FIFO mode.
Item Description