User's Manual

EA Mobile User Guide
3. Quick Start Guide
34
Pausing or ending a reading session
1. To pause or end a session or route, press the Close button on the bottom
corner of the screen.
Note: The EA_Mobile automatically saves the last 30 routes on the
systems drive. (When 30 routes have been saved, the
EA_Mobile will overwrite the oldest route.
— OR —
To save the current route, press the Close button on the bottom of the
screen.
This takes you to the Main Menu.
2. Press the Routes button and then click the Save Current Route button.
This saves the results of the current route to the USB flash drive. (This is the
button you would likely select when a route is completed and you are ready
to load a new route or when you are done.)
— OR —
To exit the system, go to the Main Menu and press the Power Off button.
Note: Powering down the system will not result in data being lost,
even if the route is not saved to the USB flash drive.
Resuming a route
1. From the Main Menu, press the Routes button.
A new menu is displayed with the following buttons: Load New Route, Save
Current Route, Resume Route, Save Old Route, and Close as shown in
Figure 3-10.
Note: If a route has not been previously loaded, the Save Current
Route button will be disabled.
Figure 3-10.