User's Manual

EA Mobile User Guide
6. Reading mode
55
Entering Command mode
To access the Command mode at any time during a reading session:
• Press the Close button on the Reading Current Route window to suspend
reads until you return.
Resuming reading
Caution: Prior to resuming reading a route, verify the date and time (see
“Setting Date and Time” on page 53).
To resume reading where you left off:
• Navigate to the Reading window.
The EA_Mobile will now start reading endpoints within range.
Saving a route
To save a route:
1. Navigate back to the Main Menu and select the Route button.
2. Select the Save Current Route button on the Route window and wait while
the route is saved.
Note: If the Route was resumed, the route will be saved at the top
level directory of the USB. If the route to be saved was loaded,
and not resumed, the route will be saved in the directory on the
USB flash drive from where the route was loaded.
Powering down the EA_Mobile
To power down the unit:
1. Navigate back to the Main Menu and select the Power Off button.
This will ask you to confirm the Power Off and, if the route was not saved, it
will display a message indicating route not saved.
2. Press the Okay button to power down.
— OR —
3. Press the Cancel button to continue.
Note: The EA_Mobile automatically saves route data for the last 30
routes.
Resuming a route after powering down
Caution: Prior to resuming reading a route, verify the date and time (see
“Setting Date and Time” on page 53).
To resume a route after powering down or loading a different route:
1. Navigate to the Main Menu.
2. Press the Route button.
3. Press the Resume Route button.