User's Manual

EA Mobile User Guide
7. Command mode
72
7. Change the desired setting by selecting alphabetic characters on the LCD
touch screen display.
Caution: The CLEAR button on the LCD touch screen will clear/reset all
parameters to default values. Do NOT press CLEAR to correct
individual entries.
8. To correct an entry, use the Back Space button on the LCD touch screen
display.
Caution: The FW UPDATE button on the LCD touch screen display will try
to update the firmware, do not press this button unless
instructed to do so by Customer Support.
9. When you are satisfied with the entered changes and settings, press the
APPLY button on the LCD touch screen display to apply the new settings and
permanently reset the default values in EA_Mobile memory.
10.Press the Close button to exit this function and return to the Settings window.
Note: Closing the window with out hitting the APPLY button will result
in the settings returning to their original value and all changes
will be lost.
User Accounts button
The User Accounts button displays the User Account window (Figure 7-12) that
allows the operator to add, modify and delete user accounts.
There are a maximum of 25 user accounts.
Note: The initial user name is ‘ELSTER’ and the initial password is
‘357837’. For security purposes, this user account may be
removed after new user accounts are created and logged in.
Note: Make sure to enter the user name in all capital letters.
Note: This User Account can be deleted.
Note: The account for a user that is currently logged in cannot be
deleted.