SRP Product Specification Version: Draft May 2, 2000 AMMO Automated Systems 107 Deerskin Lane Scott Depot, W. V.
SRP PRODUCT SPECIFICATION HISTORY: Date By: Revision Description 16/5/99 Dale Jenkins Draft Created document 12/29/99 | DRI Draft Changes from Dana 51200 DRY Piaf Added frequencies to block diagram APPROVAL: NAME, SIGN/DATE CAWINDOWSITEMPISRP Product Specification.
SRP PRODUCT SPECIFICATION ‘Fable of contents 1 OVERVIEW. 11 DESCRIPTION 1. MODES 1 POWER ON/OF! 2 FINDS SERIAL NUMBER 3 READ METER INDEX. 4 READ PER-DIVIDER. 5 PROGRAM INDEX 6 USER SETUP MODE CONICAL INFORMATION. 1.2, 12 12 12 1.3.
SRP PRODUCT SPECIFICATION 1 OVERVIEW This document describes the Short Range Programmer (SR. The SRP is designed to provide interrogation and programming for American Meter Co. TRACE® Transponders. This document also includes technical 3 well as description of operation. It is assumed the user has a working knowledge of transponder operation. 1.1 DESCRIPTION The SRP is a low power, reduced receiver sensitivity, hart range, programmer /interrogator.
SRP PRODUCT SPECIFICATION re ma TRACE 1.21 FIND SERRATE, NUMBER MODE Find mode will interrogate with wild cards or with a serial number the user enters. Enter the serial number of the transponder if needed then hit the *Interrogate’ key. The unit will show the serial number plus the transponder type and firmware version. The serial number found will bo used in cache of the other modes.
SRP PRODUCT SPECIFICATION Figure 4 Figure 5 FIND SN/VERS/TYPE FIND SN/VERS/TYPE Serial No.. 27227272727 Serial No.. 03571641 TYPECASTS VERSE CARRIER NOT DETECTED Figure 6 Figure 7 1.2.2 READ METER INDEX This mode will read the transponder meter index (meter count). The user may enter the serial number of use the Find Mode’s serial number. Hitting the Interrogate key will read the transponder’s serial number and any tamper flags set. The tamper flag will show as “DAMPER’ on the last line of the screen.
SRP PRODUCT SPECIFICATION 7 READ PER-DIVIDER READ PER-DIVIDER 1 Serial No... 272227727 Serial No.. 03571641 001/100 Figure 10 Figure 11 READ PER-DIV and CF READ PREDICATIVE and CF Serial No.. 03571641 Serial No.. 03571641 000/100 CR CT FACT.= 001/001 Figure 12 Figure 13 1.2.4 PROGRAM INDEX The Program index will not take wild cards. The serial number muse be entered by either the Find mode or user. This mode wilt also program the compensation factor if the transponder firmware is version 9 or greater.
SRP PRODUCT SPECIFICATION MODES INTERROGATE Power on, Self test Automatic power off ¥ Find mode Interrogate Read meter index Interrogate {Use SN from Find mode Y \ Read per-divider 1 Enter SM Interrogate v Read per-divider and CF Only if version 9 code farm Find mode . {Use SN from J T Find mode v .
SRP PRODUCT SPECIFICATION 12,5 USER SETUP MODE The User setup mode is entered by holding the Power ON/OFF key pressed for 5 absconds. This made is intended for service personnel. 2 TECHNICAL INFORMATION Figure 19 shows the block diagram Page 12 of 1S CAWINDOWSPEMPISRP Product Specification.