Operation Manual

Warning:

Do not connect any amplifier with coaxial connector that does not contain Dolby digital AC 3 or DTS decoder. Any attempt to

do so and play of DVD disc will result in damaging your speakers and causing possible hearing injury. Other than DVD disc,

VCD and CD can be operated normally without conforming to the above restriction.

Setting of TV system

If you find the image like non-fully zoomed picture, brim picture covered or black & white picture etc, please select PAL or NTSC

by systems setting or press N/P button to switch the TV system on the remote control. This DVD disc is capable of supporting

different scales picture, as a result, non-full zoomed picture could appear or picture be partially covered on user’s TV set.

5. FUNCTION OPERATION

5.1 Function Buttons On the Front Panel

These button’s function is the same as the corresponding buttons on the remote control. For the detail information, please see

the following texts.

5.2 Function Buttons On the Remote Control

STANDBY

Press the button once and the player will go into standby state. Press the button again and the player will resume Operating as

before.

USB/CARD

Press the button to choice USB disk or Card memory source input.

Note: The button is available while the player is in stop or no disc state.

OPEN/CLOSE

To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE again.

AUDIO

Press the button to choose different dubbing languages. (Requires disc support)

SUBTITLE

Press the button to display different captions (Requires support from disc)

For DVD discs, press the button to choose the desired title and chapter and search the desired title time and chapter time.

For Super VCD, VCD, CD discs, press this button to search the desired disc time and track time and choose the desired track

0-9 keys

These keys are used to input the time, as well as title, chapter and track numbers.

When a numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and press ENTER to confirm.

When a CD or VCD is playing (with PBC off), press the 0-9 keys to select a track directly, then press ENTER to confirm.

CLEAR

Press CLEAR to delete numbers you have entered. Press once to delete one digit, press and hold to delete all digits.

During DVD playback, press MENU to display the disc menu of the current title.

Note: This function is subject to the disc

SETUP

Press the button to enter the system setting menu. press the button again to exit the menu.

DISPLAY

Press the button to show the information of the current playing disc.

 28

02-8847MP4N-GB 4/26/06 2:50 PM Page 28

Downloaded from www.Manualslib.com manuals search engine