Instruction manual

Connection terminals for this DVD receiver
are found on the rear panel. Read carefully
and follow the manufacturers' instructions
of any video and audio device being
connected to this unit.
have been properly completed.
Do not connect the power until all connections
Red terminal (marked R) is for connecting the
right channel. The white terminal (marked L)
is for connecting the left channel. The yellow
terminal is for video connection. Make sure
all connections are securely made. Improper
connections may cause noise, poor perfor-
mance, or cause damage to the equipment.
Do not tie the AV cord with any other cords,
such as the power cord or speaker wires, as
it may result in poor picture and/or sound
quality.
CONNECTING
DEVICES
11
DVD-RECEIVER
MODEL:
POWER SOURCE:
POWER CONSUMPTION:
ITEM NO.:
SERIAL NO.:
HT-253
100-240V 50~60Hz
130W
AUDIO
AUX IN
LINE OUT
SW
COAXIAL
AUX
VIDEO IN
VIDEO OUTPUT
Pr/Cr
VIDEO
S-VIDEO
Y
Pb/Cb
SCART IN/OUT
AM ANTENNA FM
100-240V
50~60Hz
SPEAKER OUTPUT
SW CEN
FL
FL FR
SLSR
4 4 4 4 4
8
DIGITAL RECEIVER
CD/DVD AUX PLAYER
ACTIVE
SUBWOOFER (OPTIONAL)
POWER AMPLIFIER
AUX VIDEO