Instruction manual

19
LPCM SETUP
This option sets the audio output format sent using the
unit’s optical digital audio output.
 Linear PCM OUT
 LPCM 48K
In the Linear PCM setting, “48K” means “the digital
audio output maximum sampling rate is 48kHz”;
therefore, when the title’s encoding sampling rate* is
96kHz, the output will be forced converted to 48kHz.
 LPCM 96K
If “96K” is selected, then the maximum
output-sampling rate is 96kHz and no conversion will
take place.
NOTES:
 Sampling rate:
When a sound wave is converted to a digital signal, the sound is
sampled and converted to data at a specific frequency rate. For
example, a signal with a 96 kHz sampling rate indicates that in one
second, the analog signal was sampled 96000 times to produce
the digital signal.
 In LPCM set-up menu, there will be a case that even when “LPCM
96K” is selected, output signal is converted to 48kHz if the disc has
the copy guard management system in it.
DISC CODING AND OUTPUT FORMAT
Disc Audio encoding format Digital output format
Dolby Digital
®
Dolby Digital Bit stream
(1~5.1 ch) or 48kHz/16bits
2ch Linear PCM
DTS
®
Bit stream (1~5.1 ch) or OFF
DVD
Linear PCM
(48/96kHz, 24bits)
Linear PCM
(48kHz/16 bits up to 96kHz/24bits)
Video CD
MPEG 1 Linear PCM (44.1kHz sampling)
Audio CD
Linear PCM Linear PCM (44.1kHz/16bit)
GENERAL SETUP
There are four available selections: ANGLE MARK, OSD
LANG, CAPTIONS, and SCR SAVER.
 ANGLE MARK
During playback of a title with multiple angle sections,
the message "
" will appear on the upper corner of
the screen.
 When ANGLE MARK is set to "ON", the angle mark
OSD will stay on the screen until the end of the
playback title or chapter.
 When ANGLE MARK is set to "OFF", the angle mark
OSD will stay on the screen for 3 sec and then
disappear.
 OSD LANGUAGE
You can select the language for the setup menu or the
operation message display. There are five available
OSD languages: ENGLISH, FRENCH, GERMAN,
DUTCH and DANISH for display.
- - GENERAL PAGE - -
ANGLE MARK ON
OSD LANG OFF
CAPTIONS
SCR SAVER
MAIN PAGE
ANGLE MARK ON/OFF
- - GENERAL PAGE - -
ANGLE MARK
OSD LANG ENGLISH
CAPTIONS FRENCH
SCR SAVER GERMAN
DUTCH
MAIN PAGE DANISH
SET OSD LANGUAGE
- - LPCM SETUP PAGE - -
LPCM OUTPUT LPCM 48K
LPCM 96K
MAIN PAGE
SET LPCM OUTPUT TO 48 OR 96K