Instruction manual

17
LINEAR PCM SETUP
This option sets the audio output format sent using the
unit’s coaxial digital audio output.
Linear PCM OUT
 LPCM 48K
In the Linear PCM setting, “48K” means “the digital
audio output maximum sampling rate is 48KHz”;
therefore, when the title’s encoding sampling rate* is
96KHz, the output will be forced converted to 48KHz.
 LPCM 96K
If “96K” is selected, then the maximum output
sampling rate is 96KHz and no conversion will take
place.
DISC CODING AND OUTPUT FORMAT
Disc Audio encoding format Digital output format
Dolby
®
Digital
Dolby
®
Digital Bit stream
(1~5.1 ch) or 48kHz/16bits
2ch Linear PCM
DTS
®
Bit stream (1~5.1 ch) or OFF
Linear PCM
(48/96kHz, 24bits)
Linear PCM
(48KHz/16 bits up to
96kHz/24bits)
DVD
MPEG
PCM (2ch) (48KHz/16 bit) or
MPEG audio bit stream (1-7.1 ch)
Video
CD
MPEG I Linear PCM (44.1KHz sampling)
Audio
CD
Linear PCM Linear PCM (44.1kHz/16bit)
NOTES:
 Sampling rate:
When a sound wave is converted to a digital signal, the sound is
sampled and converted to data at a specific frequency rate. For
example, a signal with a 96 kHz sampling rate indicates that in
one second, the analog signal was sampled 96000 times to
produce the digital signal.
 In LPCM set-up menu, there will be a case that even when
“LPCM 96K” is selected, output signal is converted to 48KHz if the
disc has the copy guard management system in it.
GENERAL SETUP
There are four available selections: ANGLE MARK,
OSD LANG, CAPTIONS, and SCR SAVER.
ANGLE MARK
During playback of a title with multiple angle sections,
the message "
" will appear on the upper corner of the
screen.
 When ANGLE MARK is set to "ON", the angle mark
OSD will stay on the screen until the end of the
playback title or chapter.
 When ANGLE MARK is set to "OFF", the angle
mark OSD will stay on the screen for 3 sec and then
disappear.
OSD LANGUAGE
You can select the language for the setup menu or
the operation message display. There are four available
OSD languages: ENGLISH, FRENCH, SPANISH and
CHINESE for display. Default setting is “English”.
- - GENERAL PAGE - -
ANGLE MARK
OSD LANG ENGLISH
CAPTIONS FRENCH
PIC MODE GERMAN
SCR SAVER SPANISH
DUTCH
MAIN PAGE DANISH
SET OSD LANGUAGE
- - LPCM SETUP - -
LPCM OUT LPCM 48K
LPCM 96K
MAIN PAGE
SET LPCM OUTPUT TO 48K / 96K
- - GENERAL PAGE - -
ANGLE MARK ON
OSD LANG OFF
CAPTIONS
PIC MODE
SCR SAVER
MAIN PAGE
ANGLE MARK ON/OFF