Instruction manual

20
ON-SCREEN DISPLAY (OSD)
DVD OSD Modes
There are two OSD display modes available when
playing a DVD disc.
Mode 1
Shows the status of the pressed button and some
special messages are displayed on the screen. For
example, when the
OPEN/CLOSE button is pressed, the OSD
shows:
Mode 2
Shows the playback information of a movie or title.
 When pressing the DISPLAY button on R/C, the
information OSD will display on the screen in the
sequence as shown below:
First time Second time
Third time Fourth time
 When pressing the DISPLAY button on the remote
control again, it will turn off the OSD.
Audio CD / VCD OSD Modes
There are two OSD display modes available when playing
a VCD, and Audio CD disc.
Mode 1
Shows the status of the pressed button and some special
messages are displayed on the screen as previous
description.
Mode 2
Shows the playback time information of a disc.
PBC ON (VCD 2.0 above only):
 When pressing the DISPLAY button on R/C, the
information OSD will display on the screen in the
sequence as shown below:
1. SINGLE ELAPSED 2. SINGLE REMAIN
PBC OFF or Audio CD playback:
1. SINGLE ELAPSED 2. SINGLE REMAIN
3. TOTAL ELAPSED 4. TOTAL REMAIN
 When pressing the DISPLAY button on the remote
control again, it will turn off the OSD.
OPEN
TITLE 002/04 CHAPTER 001/009
00:05:13
TITLE REMAIN
01:35:13
CHAPTER ELAPSED
00:05:13
CHAPTER REMAIN
00:25:13
CLOSE
SINGLE ELAPSED
00:05:13
SINGLE REMAIN
00:05:13
SINGLE ELAPSED
00:05:13
SINGLE REMAIN
00:05:13
TOTAL ELAPSED
00:05:13
TOTAL REMAIN
00:05:13