Instruction Manual DV-150 DVD-Player
SAFETY INFORMATION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION : To reduce the 8. Do not place naked flame sources, such as candles, on the appliance. 9. Do not locate the appliance or cord near heat sources such as radiators, heaters, air ducts or direct sunlight. 10. Do not block any of the ventilation openings. Ensure that vents are not covered by newspapers, tablecloths, curtains, etc. Do not install in a tight-fitting cabinet. 11.
SAFETY INFORMATION Compulsory Warnings Installation Warnings If the supply cord is damaged, it must be replaced by Singer service Technicion, in order to avoid a hazard. This product has not been designed for any uses other than those specified in this booklet. Ventilation Slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not the blocked or covered.
FEATURES CONTENTS DVD, CD, MP3, Picture CD compatible CD-R, CD-RW capable TV format: PAL/ NTSC color system 4:3 / 16:9 screen format select Video output: Composite Video output S-Video output YPbPr output SCART output Audio output: Down-mix stereo output DTS surround output DVD features: Multi Subtitle select Multi Language select Multi Angle select Other features: On screen control menu Digital zooming Slow motion forward Child lock Page WARNING IMPORTANT NOTICE FEATURES 4 INTRODUCTION About DVD Abou
INTRODUCTION THE REMOTE CONTROL Loading batteries to the remote control ˇ ˇ ˇ ˇ ˇ Remove the battery compartment cover. Load two AAA (UM-4 or R03) batteries into the battery compartment. Make sure that the batteries have been inserted in the correct polarities matching to the symbols +, - marked in the battery compartment. Close the battery compartment cover. When replacing batteries, replace both batteries.
INTRODUCTION About DVD Select a DVD disc DVD (Digital Versatile Disc) is a digital video medium under the MPEG II format, featuring a variety of revolutionary entertainment capabilities. The MPEG II video compression technology provides capacity for an excellent picture of minimum 500 lines resolution on screen, up to 8 language soundtracks, up to 9 views from different camera angles and up to 32 language subtitles (provided the DVD disc itself supports these features).
INTRODUCTION About the player Front panel 4 DV-150 DVD-PLAYER 5 6 2 1 POWER 3 OPEN/CLOSE STOP PLAY/PAUSE 5 STOP 6 PLAY/PAUSE Back panel 1 4 3 2 5 6 7 8 1 Left channel output jack 7 2 Pr/Pb/Y output jack 8 3 VIDEO output jack 4 Digital signal OPTICAL output jack 5 Right channel output jack 6 Digital signal COAXIAL output jack 8 S-Video output jack Scart output jack
INTRODUCTION Remote control REMARK Some features of the player can only be performed by the remote control. Some features described in this owner's manual are related to the Disc's encoding. Some features may not be available, if the disc encoding does not support the feature. Some features contained in this DVD player are related to the DVD Disc's software. Some features cannot be performed if the disc does not support the feature, or requires special settings.
SYSTEM CONNECTION Preparations System connection(Optional according to your back panel) 1. When making connection between this unit and other components, be sure all connection with power-off. 2. Audio/Video cables are connected according to the different colour identification and they should be fitted firmly. Yellow to video terminal White to audio terminal L,L Red to audio terminal R,R Black to audio terminal W,CENTER 3.
GETTING STARTED REMARK Unpack the unit. Read through thisowner's manual before installation and use. Load batteries into the remote control unit. Connect the system,make sure the connections are secured. Connect the power plug to the AC power outlet. Some features contained in this DVD player are related to the DVD disc's software. Some features cannot be performed if the disc does not support The feature, or requires special settings.
GETTING ST ARTED Video port setup The DVD player is equipped with the following video ports: Composite Video (V) (Always active) S-Video (Default option) The DVD player has been pre-set at the factory to Composite Video (V) and S-Video outputs, as default settings. The player is equipped with the following video output ports: Composite Video and S-Video always active, does not need setting. For TV System setting SEARCH SUBTITLE ANGLE 6 TITLE , highlight "Video" icon.
FUNCTION BUTTONS Power ON / OFF To switch the player Between power on and off mode: POWER ON /OFF Press POWER button on front panel (Always switch off the player after use) Open /Close disctray To open and close The disc tray: STANDBY EJECT P/N EJECT MUTE Press EJECT button PROG SEARCH on the remote SUBTITLE ANGLE SETUP RETURN ENTER TITLE MENU CHANNEL LANGUAGE RESET REPEAT MARK CLEAR SLOW A-B PSCAN MODE Play / Pause / Step/ Stop 1 2 SEARCH SUBTITLE Press PLAY/PAUSE button To p
FUNCTION BUTTONS Skip Forward / Backward ANGLE SETUP RETURN 1 Press to skip forward (chapters) 2 Press to skip backward (chapters) ENTER TITLE MENU CHANNEL RESET LANGUAGE REPEAT MARK CLEAR SLOW A- B P SCAN MODE DISPLAY SHUFFLE STOP STEP F.REV F.FWD VOLUME PLAY/PAUSE PREV Player will not advance or reverse during "WARNING" section of any disc.
FUNCTION BUTTONS Select an item in menu In the disc menu or setup menu ANGLE SETUP RETURN 1 ENTER TITLE MENU CHANNEL LANGUAGE RESET REPEAT MARK CLEAR SLOW A-B PSCAN MODE DISPLAY SHUFFLE 1 press cursor button 2 Press 3 Press 4 Press 4 2 STEP F.FWD PREV to confirm a selection. 3 VOLUME PLAY/PAUSE STOP F.REV to move between function items. to cancel an entry. NEXT to return to the previous menu.
FUNCTION BUTTONS Numeric Key Pad / Direct Program access STANDBY Direct Program access EJECT MUTE P/N PROG 1 SEARCH SUBTITLE 1 Input the desired Chapter or Track number using the Numeric key pad. Press ENTER button to confirm your direct access Chapter or key selection.
FUNCTION BUTTONS Multi-Subtitle STANDBY If a DVD disc contains the Multi-Subtitle feature, subtitle may be selected: EJECT MUTE P/N PROG SEARCH 1 1 SUBTITLE ANGLE SETUP RETURN to select the desired subtitle. Status will be displayed on screen. ENTER TITLE MENU CHANNEL During in playback, repeat pressing SUBTITLE button LANGUAGE RESET REPEAT MARK CLEAR SLOW A-B PSCAN MODE Total subtitle ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
FUNCTION BUTTONS Mode 1 First,You should press[STOP] Key 2 Press the [MODE]key MODE STOP may select video output . SEARCH You can choose between S-Video, RGB and YUV. SUBTITLE ANGLE SETUP RETURN P ress the [ PSCAN ]key ENTER TITLE MENU CHANNEL RESET 3 1 REPEAT MARK CLEAR SLOW A-B PSCAN MODE DISPLAY SHUFFLE VOLUME STOP STEP PLAY/PAUSE F.REV F.FWD PREV PS CAN to choose between progessive scan and interlace scan.
FUNCTION BUTTONS SEARCH a desired section This functi on does NOT apply to M P3 STANDBY EJECT MUTE P/N PROG 1 SEARCH 1 SEARCH SUBTITLE ANGLE Press the SEARCH button to play at a desired Title, Chapter or Time. SETUP RETURN ENTER TITLE MENU CHANNEL RESET DVD disc ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
FUNCTION BUTTONS Repeat 1 REPEAT STANDBY Press REPEAT button multiple times to reach desired repeat mode (see below).
FUNCTION BUTTONS Mute STANDBY 1 EJECT 1 MUTE P/N PROG MUTE Press MUTE button To mute ( turn off ) the audio output. SEARCH Press the button again To resume normal audio output. SUBTITLE ANGLE SETUP RETURN ENTER TITLE MENU CHANNEL RESET LANGUAGE REPEAT MARK CLEAR SLOW A-B PSCAN MODE DISPLAY SHUFFLE VOLUME PBC Play STANDBY EJECT P/N MUTE PROG 1 For VCD2.
FUNCTION BUTTONS Program setting Program to play a DVD and CD disc in a desired sequence automatically. Load a DVD disc. DVD program menu 1 Press the PROG PROG button, the DVD program menu will appear . 2 Use numeric key pad Program Input to input the Title number and the Chapter number, Repeat step 2 until programming is completed.
FUNCTION BUTTONS Return STANDBY EJECT P/N MUTE 1 In PBC mode, when pressing “RETURN” Key to PROG RETURN return to the menu, thus canceling the PBC mode , the “RETURN” key will be invalid SEARCH SUBTITLE ANGLE SETUP 12 RETURN ENTER TITLE MENU CHANNEL LANGUAGE RESET REPEAT MARK CLEAR SLOW A-B PSCAN MODE Mark STANDBY EJECT MUTE P/N PROG SEARCH SUBTITLE ANGLE SETUP RETURN 2 ENTER TITLE MENU CHANNEL LANGUAGE RESET REPEAT MARK CLEAR SLOW A-B PSCAN MODE 3 1 STORING
FUNCTION BUTTONS Clear STANDBY EJECT 1 Setting program or searching need to input number. press MUTE P/N PROG CLEAR CLEAR button to clear the number when the input number is wrong.
ON SCREEN DISPLA Y DISPLAY Press DISPLAY button , an On Screen Display (OSD) indicator will be displayed at the upper part of the TV screen in displaying the disc information and operation status. The OSD indicator is a user friendly interface designed for displaying the status of the playback. When a dif ferent disc is loaded (DVD, CD or MP3), the OSD indicator bar will be different. The OSD indicator will remain on screen until pressing the DISPLAY button to turn it off. OSD - DVD mode ... ... ... ...
ON SCREEN DISPLAY MP3 mode Playback time Current folder Disc T rack current track / total tracks ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... Mp3 2/133 00:02:43 [Root] 1 2 3 4 5 001 002 003 004 005 6 7 8 9 10 006 007 008 009 010 File: 002 ......... ......... ......
SETUP Various features of the player can be adjusted in the SETUP menu: Video Press SETUP button SETUP menu appears. Enter this menu to setup the video setting Press SETUP button Highlight "Video", Language Video Audio More aud Rating Press ENTER , Video sub menu appears. E NT E R Language Video Audio Rating TV shape 4:3LB 4:3PS TV SYSTEM PAL 4:3LB Video out s-video Highlight the desired icon Press ENTER button to activate the setting sub menu.
SETUP MENU (Press SETUP button) 16:9 Wide Screen Rating When you connect to a wide screen TV , this setting will allow the original aspect ratio will be display full screen. Enter this menu to setup the rating level of the player. The player will require a password to play any disc with rating level higher than the setting. Press SETUP NOTE Depending on the DVD disc format, e.g. 2.35:1, the wide screen setting may still having black margins above and below the picture.
TROUBLE SHOOTING Should your DVD player develop a problem, please check below before requesting service: Symptom No Power Check and Action Check if the power cord has been properly connected to the power outlet. Check if the main power has been switched on. Does not play No disc, load a disc. Disc has been loaded upside down. Place the disc with the label side up. Disc's region code does not match to the player. Disc is not correct type for player.
TROUBLE SHOOTING CAUTION RISKOF ELECTRIC SHOCK DO NOT OPEN Symptom Cannot SKIP or SEARCH CAUTION : To reduce the risk of fire and electric shock, do not remove the cover (or back) of the unit. Refer servicing only to Singer Service Technician Check and Action Some discs are programmed that do not allow users to SKIP or SEARCH at some sections, especially at the beginning WARNING section. Single Chapter disc No sound or sound output not complete cannot apply SKI P function.
SPECIFICATIONS Type of Disc DVD CD-DA CD-MP3 JPEG CD CD-R / CD-RW Video Format MPEG 2 Audio Format MPEG 1, LAYER 1, LA YER 2 , LAYER 3 Signal Output Color System: PAL/NTSC Audio System: DIGITAL down mix stereo DIGITAL digital output DTS digital output Audio DAC 16bit/48KHz Video Output: 1 Vpp (at 75 ohm) Audio Output (Stereo): 2 Vpp Frequency Response CD: 4Hz 20KHz (EIAT) DVD: 4Hz 22KHz (48K) 4Hz 44KHz (96K) S/N radio > 92 dB THD < 0.
For further information please visit our website: www.eltax.com Item no.
