User's Manual Part 2

6.2.2 Replacing Cleaning Roller Sheath
Refer to Figure 6-3, and proceed as follows:
Step 1. Turn off power, open the cover, and remove the Upper Cleaning Roller.
Step 2. Slide off the old outer sheath, and replace it with a new one.
Step 3. Reinstall the Cleaning Roller, and while avioding contact with the tacky surface
of the roller, remove the protective tape. If necessary, turn the Manual Advance
knob while removing the tape.
6-4
980286-001 Rev. A
CHAPTER 6
MAINTENANCE AND ADJUSTMENTS
Figure 6-3. Changing the Upper Cleaning Roller