STUDIOVISION STV-150-4KH / STV-230-4KH / STV-280-4KH 4K HDMI Monitor (15" / 23" / 28") STUDIOVISION 4K SDI USER MANUAL HDMI1 HDMI2 HDMI3 HDMI4 DVI VGA MENU EXIT F1 F2 F3 F4
THANK YOU FOR CHOOSING ELVID. The Elvid StudioVision 4K monitor is a professional display for SD, HD, and 4K video signals. A wide variety of sources can be connected using the available inputs, and multiple inputs can be displayed simultaneously. The monitor comes enclosed in a travel case for protection during storage and transport, and can be used in the field with a V-mount battery for power.
TABLE OF CONTENTS Overview ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������4 Getting Started �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
OVERVIEW FRONT STUDIOVISION 4K SDI Speakers HDMI1 HDMI2 HDMI3 HDMI4 SDI input selector HDMI 1–4 input selectors DVI input selector VGA input selector Menu button Scroll left button Scroll right button Exit button F1–F4 function buttons Power indicator Headphone output 4 DVI VGA MENU EXIT F1 F2 F3 F4
BACK Release button V-mount battery plate Handle Connector protection R 2 G 3 GND 5 TALLY VGA DVI 2 1 HDMI 4 3 L AUDIO R IN SDI OUT OFF DC 15V VESA 75/100 mounting threads Tally port VGA input DVI input HDMI input (×4)* RCA audio L/R input SDI input/output 4-pin XLR power input Power switch *Note: HDMI 1 supports 4K @ 60 Hz. HDMI 2–4 support 4K @ 30 Hz.
GETTING STARTED ATTACHING A V-MOUNT BATTERY Attach a battery by sliding it into the V-mount plate until it clicks into place. Release the battery by pressing the release button and sliding the battery off the V-mount. CONNECTING TO AC POWER 1. Plug the AC power adapter’s 4-pin XLR connector into the power input on the back of the monitor. 2. Connect the power cable to the AC adapter, and plug it into an outlet. POWERING ON 1.
USING THE STUDIOVISION MONITOR REMOVING THE MONITOR FROM THE FLIGHT CASE 1. Remove the V-mount battery, or unplug the AC power adapter. 2. Set the monitor face-up on a flat surface. VESA MOUNT The monitors are equipped with 75 × 75 and 100 × 100 VESA mounting holes. Refer to your VESA mount’s weight capacity specifications to ensure that it will securely support the monitor. 3. Use an M5 hex key to remove the four mounting screws. To mount the monitor on a VESA mount, follow these steps: 1.
STAND-ALONE USE Metal feet and attachment screws are included for stand-alone operation. RACK MOUNT (15 IN. MONITOR ONLY) To mount the STV-150-4KH 15-inch monitor into a standard 19-inch machine rack, follow these steps: 1. Attach the feet to the bottom edge of the monitor with the included screws. 1. Remove the V-mount battery, or unplug the AC power adapter. 2. Remove the monitor from its flight case. 3. Use standard rack screws to mount the monitor into a 19-inch machine rack.
USER INTERFACE To reassign menus to the function buttons, follow these steps: FRONT PANEL BUTTONS Use the buttons on the front of the monitor as shortcuts to various functions instead of cycling through the on-screen menus. 1. Press and hold the function button until the function select menu appears on-screen. Input Selectors: Selects which monitor input is displayed on the screen. The selected button illuminates.
SUBMENUS 1. As you scroll through the submenu functions, the current value will appear below it. RESTORING THE FACTORY PRESETS To erase all submenu changes and return to the factory presets: 1. Press Menu to open the main menu, and scroll to the System submenu. Press Menu again to open the submenu. 2. Scroll to the function you want to adjust, and press Menu. The value will change to yellow. 2. Use the and buttons to select Reset in the System submenu, and press the Menu button. 3.
PICTURE MENU BRIGHTNESS Adjusts the monitor’s brightness value from 0–100. The preset value is 50. CONTRAST1 Adjusts the contrast value of the on-screen image, with values from 0–100. The preset value is 50. COLOR SPACE Selects the color space that’s appropriate for your project. Select Rec 709 for HD broadcast standard, or Native (preset) to employ the full color gamut of the monitor. SATURATION1 Adjusts the screen color saturation from 0–100. The preset value is 50.
FUNCTION MENU CENTER MARKER Select On to display a center marker on-screen. SAFETY MARKER Displays and adjusts the size of the on-screen safety frame markers. Press the or navigation buttons repeatedly to scroll through the safe frame settings: 95%, 93%, 90%, 88%, 85%, or 80%. ASPECT MARKER Displays a frame marker around the aspect ratio of the incoming video signal. Available settings are Full (preset), 17:9, 16:9, 4:3, 1.85:1, and 2.35:1.
DISPLAY MODE MENU 1P Displays the incoming video signal on the full screen. 1P is the preset value for display mode. 2P LR Splits the screen into left and right halves and displays a video signal on each half. 2P TB Splits the screen into top and bottom halves and displays a video signal on each half. 2P PIP Displays the first video signal on the full screen and places the second video signal in a frame within the picture. 4P Divides the screen into quarters and displays a video signal in each quarter.
INPUT MENU Select SDI, HDMI 1–4, DVI, and VGA inputs, or Auto mode. When Auto is selected, the monitor scans each input and displays the first input signal it detects. AUDIO MENU VOLUME Adjusts the volume output from 0 (preset) to 100. AUDIO SOURCE Select Analog or Digital (preset). The audio source should be set to the incoming video signal. Select Analog to choose the input signal from the audio inputs instead of the audio from your video signal.
VGA MENU This menu is accessible only with a VGA input signal. AUTO ADJUST This is the recommended setting. It automatically adjusts and calibrates the monitor to the analog signal. H POSITION Adjusts the horizontal position of the monitor’s display from 0–100. V POSITION Adjusts the vertical position of the monitor’s display from 0–100. CLOCK Adjusts settings to match the source’s clock rate from 0–100. PHASE Adjust this setting to remove any vertical banding effects from 0–100.
SYSTEM MENU RESET Resets the monitor to the factory presets. MENU TIME Adjusts the length of time the on-screen menu is displayed. Select from 5 to 60 seconds. The preset value is 10. OSD H POSITION Adjust the horizontal position of the on-screen menu from 0 (flush with the left side of the screen) to 100 (flush with the right side). The preset value is 50. OSD V POSITION Adjust the vertical position of the on-screen menu from 0 (flush with the top of the screen) to 100 (flush with the bottom).
SUPPORTED RESOLUTIONS AND FRAME RATES HDMI2.0 HDMI1.4 480i (59.94) 480i (59.94) 480i (60) 480i (60) 576i (50) 3G-SDI 525 59.94i 625 50i 576i (50) 720 50p 480p (59.94) 480p (59.94) 720 59.94p 480p (60) 480p (60) 720 60p 576p (50) 576p (50) 720 23.98p 720p (23.98) 720p (23.98) 720 24p 720p (24) 720p (24) 720 25p 720p (25) 720p (25) 720 29.97p 720p (29.97) 720p (29.97) 720 30p 720p (30) 720p (30) 1080 50i 720p (50) 720p (50) 1080 59.94i 720p (59.94) 720p (59.
VGA DVI-I Resolution Hz Resolution 800×600 56/60/70/72/75 720×480 60 1024×768 50/60/66/70/75 800×600 56/60/72/75 1152×864 60/70/75 1024×768 50/60/66/70/75 1152×900 76 1152×864 60/70/75/76 1280×720 50/60/70/72/75 1280×720 50/60/70/72/75 1280×768 50/60/70/75 1280×768 50/60/70/75 1280×800 60/70/72/75 1280×800 60/70/72/75/85 1280×960 60/70/72/75 1280×960 60/72/75 1280×1024 60/70/72/75/76 1280×1024 60/70/72/75/76 1360×768 60 1360×768 60 1440×900 60/75 1400×1050 60/
SPECIFICATIONS DISPLAY POWER Panel Type IPS LCD DC Input Power 12 to 24 V DC Display Size STV-150-4KH: 15.6 in. (39.6 cm) STV-230-4KH: 23.8 in. (60.5 cm) STV-280-4KH: 28 in. (71.
TROUBLESHOOTING Problem Solution The StudioVision will not turn on. • Make sure that the AC adapter is fully plugged in, and that the AC power source is reliable. • Make sure the V-mount battery is fully charged and properly seated in the V-mount battery plate. The StudioVision is turned on, but • Check whether the color saturation is properly configured. there is only a black and white • Make sure the Check Field mode is disabled. image.
ONE-YEAR LIMITED WARRANTY This Elvid product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.