STUDIOVISION STV-150-4KH / STV-230-4KH / STV-280-4KH 4K HDMI Monitor (15" / 23" / 28") STUDIOVISION 4K SDI HDMI1 QUICKSTART GUIDE HDMI2 HDMI3 HDMI4 DVI VGA MENU EXIT F1 F2 F3 F4
BOX CONTENTS • Elvid StudioVision Monitor • Sun hood • AC adapter • DC power cord • Tally connector and hardware • Mounting feet (×2) and hardware PRECAUTIONS • Keep this product away from water and any flammable gases or liquids. • Do not expose this product to humidity or extreme heat or cold. • Make sure this product is powered off when plugging it into a power source. • Use only the correct, recommended voltage. • Do not attempt to disassemble or repair this product.
OVERVIEW FRONT STUDIOVISION 4K SDI Speakers HDMI1 HDMI2 HDMI3 HDMI4 DVI VGA MENU EXIT F1 F2 F3 F4 SDI input selector HDMI 1–4 input selectors DVI input selector VGA input selector Menu button Scroll left button Scroll right button Exit button F1–F4 function buttons Power indicator Headphone output 3
BACK Release button V-mount battery plate Handle Connector protection R 2 G 3 GND 5 TALLY VGA DVI 2 1 HDMI 4 3 L AUDIO R IN SDI OUT OFF DC 15V VESA 75/100 mounting threads Tally port VGA input DVI input HDMI input (×4)* RCA audio L/R input SDI input/output 4-pin XLR power input Power switch *Note: HDMI 1 supports 4K @ 60 Hz. HDMI 2–4 support 4K @ 30 Hz.
GETTING STARTED ATTACHING A V-MOUNT BATTERY Attach a battery by sliding it into the V-mount plate until it clicks into place. Release the battery by pressing the release button and sliding the battery off the V-mount. CONNECTING TO AC POWER 1. Plug the AC power adapter’s 4-pin XLR connector into the power input on the back of the monitor. 2. Connect the power cable to the AC adapter, and plug it into an outlet. POWERING ON 1.
USER INTERFACE MENUS 1. Press the Menu button to open the main menu. Main menu items are Picture, Function, Display Mode, Display Setting, Select Region, Input, Audio, VGA, System, and Information. 2. Use the and buttons to navigate to the desired menu. As you scroll through the menus, the submenu options appear in the bar beneath the menu item.
USER OPTIONS REMOVING THE MONITOR FROM THE FLIGHT CASE 1. Remove the V-mount battery, or unplug the AC power adapter. STAND-ALONE USE Metal feet and attachment screws are included for stand-alone operation. 2. Set the monitor faceup on a flat surface. 3. Use an M5 hex key to remove the four mounting screws. 4. Lift the monitor out of the case by the front handles. VESA MOUNT The StudioVision 4K monitors are equipped with 75×75 and 100×100 mm VESA mounting holes.
SUPPORTED RESOLUTIONS AND FRAME RATES HDMI2.0 HDMI1.4 480i (59.94) 480i (59.94) 480i (60) 480i (60) 576i (50) 3G-SDI 525 59.94i 625 50i 576i (50) 720 50p 480p (59.94) 480p (59.94) 720 59.94p 480p (60) 480p (60) 720 60p 576p (50) 576p (50) 720 23.98p 720p (23.98) 720p (23.98) 720 24p 720p (24) 720p (24) 720 25p 720p (25) 720p (25) 720 29.97p 720p (29.97) 720p (29.97) 720 30p 720p (30) 720p (30) 1080 50i 720p (50) 720p (50) 1080 59.94i 720p (59.94) 720p (59.
VGA DVI-I Resolution Hz Resolution Hz 800x600 56/60/70/72/75 720x480 60 1024x768 50/60/66/70/75 800x600 56/60/72/75 1152x864 60/70/75 1024x768 50/60/66/70/75 1152x900 76 1152x864 60/70/75/76 1280x720 50/60/70/72/75 1280x720 50/60/70/72/75 1280x768 50/60/70/75 1280x768 50/60/70/75 1280x800 60/70/72/75 1280x800 60/70/72/75/85 1280x960 60/70/72/75 1280x960 60/72/75 1280x1024 60/70/72/75/76 1280x1024 60/70/72/75/76 1360x768 60 1360x768 60 1440x900 60/75 1400x1050
SPECIFICATIONS DISPLAY POWER Panel Type IPS LCD DC Input Power 12 to 24 V DC Display Size STV-150-4KH: 15.6 in. (39.6 cm) STV-230-4KH: 23.8 in. (60.5 cm) STV-280-4KH: 28 in. (71.
TROUBLESHOOTING Problem Solution The StudioVision will not turn on. • Make sure that the AC adapter is fully plugged in, and that the AC power source is reliable. • Make sure the V-mount battery is fully charged and properly seated in the V-mount battery plate. The StudioVision is turned on, but • Check whether the color saturation is properly configured. there is only a black and white • Make sure the Check Field mode is disabled.
ONE-YEAR LIMITED WARRANTY This Elvid product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.