User's Manual

ManualsBrandsElvid ManualsMonitorsStudioVision 4K HDMI Monitor with HDR

USER MANUAL

STUDIOVISION

STV-150-4KHDR / STV-230-4KHDR / STV-280-4KHDR

4K HDMI Monitor with HDR (15" / 23" / 28")

SDI HDMI1 HDMI2 HDMI3 HDMI4 DVI VGA MENU EXIT

F1 F2 F3 F4

STUDIOVISION 4KHDR

Summary of content (20 pages)

PAGE 1
STUDIOVISION STV-150-4KHDR / STV-230-4KHDR / STV-280-4KHDR 4K HDMI Monitor with HDR (15" / 23" / 28") STUDIOVISION 4K HDR SDI USER MANUAL HDMI1 HDMI2 HDMI3 HDMI4 DVI VGA MENU EXIT F1 F2 F3 F4
PAGE 2
THANK YOU FOR CHOOSING ELVID. The Elvid StudioVision 4K monitor with HDR support is a professional display for SD, HD, and 4K video signals. A wide variety of sources can be connected using the available inputs, and multiple inputs can be displayed simultaneously. HDR10 support provides a picture with color accuracy, high contrast , and a dynamic range for a thoroughly realistic and dynamic image.
PAGE 3
TABLE OF CONTENTS Overview ��4 Getting Started ��
PAGE 4
OVERVIEW FRONT STUDIOVISION 4K HDR SDI Speakers SDI input selector HDMI 1–4 input selectors DVI input selector VGA input selector Menu button Scroll left button Scroll right button Exit button F1–F4 function buttons Power indicator Headphone output 4 HDMI1 HDMI2 HDMI3 HDMI4 DVI VGA MENU EXIT F1 F2 F3 F4
PAGE 5
BACK Release button V-mount battery plate Handle Connector protection VESA 75/100 mounting threads USB port Tally port VGA input DVI input HDMI input (×4)* RCA audio L/R input SDI input/output 4-pin XLR power input Power switch *Note: HDMI 1 & 2: Support HDMI 2.0 for 4K @ 60 Hz HDMI 3 & 4: Support HDMI 1.
PAGE 6
GETTING STARTED ATTACHING A V-MOUNT BATTERY Attach a battery by sliding it into the V-mount plate until it clicks into place. Release the battery by pressing the release button and sliding the battery off the V-mount. CONNECTING TO AC POWER 1. Plug the AC power adapter’s 4-pin XLR connector into the power input on the back of the monitor. 2. Connect the power cable to the AC adapter, and plug it into an outlet. POWERING ON 1.
PAGE 7
USING THE STUDIOVISION MONITOR REMOVING THE MONITOR FROM THE FLIGHT CASE 1. Remove the V-mount battery, or unplug the AC power adapter. 2. Set the monitor face-up on a flat surface. 3. Use an M5 hex key (not included) to remove the four mounting screws. VESA MOUNT The monitors are equipped with 75 × 75 and 100 × 100 VESA mounting holes. Refer to your VESA mount’s weight capacity specifications to ensure that it will securely support the monitor. To mount the monitor on a VESA mount, follow these steps: 1.
PAGE 8
STAND-ALONE USE Metal feet and attachment screws are included for stand-alone operation. RACK MOUNT (15 IN. MONITOR ONLY) To mount the STV-150-4KH 15-inch monitor into a standard 19-inch machine rack, follow these steps: 1. Attach the feet to the bottom edge of the monitor with the included screws. 1. Remove the V-mount battery, or unplug the AC power adapter. 2. Remove the monitor from its flight case. 3. Use standard rack screws to mount the monitor into a 19-inch machine rack.
PAGE 9
USER INTERFACE FRONT PANEL BUTTONS Use the buttons on the front of the monitor as shortcuts to various functions instead of cycling through the on-screen menus. Input Selectors: Selects which monitor input is displayed on the screen. The selected button illuminates. If an input with no incoming signal is selected, the screen will display a No Signal notification. Menu Button: Displays the main menu on the screen. Use the menu button to accept changes made in the submenus. See Menus below.
PAGE 10
SUBMENUS 1. As you scroll through the submenu functions, the current value will appear below it. 2. Scroll to the function you want to adjust, and press Menu. The value will change to yellow. 3. Use the and buttons to change the value of the submenu function, and press Menu. The new value will be saved, and you’ll return to the submenu. RESTORING THE FACTORY PRESETS To erase all submenu changes and return to the factory presets: 1. Press Menu to open the main menu, and scroll to the System submenu.
PAGE 11
PICTURE MENU BRIGHTNESS Adjusts the monitor’s brightness value from 0–100. The preset value is 50. CONTRAST1 Adjusts the contrast value of the on-screen image, with values from 0–100. The preset value is 50. SATURATION1 Adjusts the screen color saturation from 0–100. The preset value is 50. HUE1 Adjusts the hue value of the on-screen image from 0–100. The preset value is 50. SHARPNESS Adjusts the fine detail of the picture with values from 0–4. The preset value is 2.
PAGE 12
FUNCTION MENU CENTER MARKER Select On to display a center marker on-screen. SAFETY MARKER Displays and adjusts the size of the on-screen safety frame markers. Press the or navigation buttons repeatedly to scroll through the safe frame settings: 95%, 93%, 90%, 88%, 85%, or 80%. ASPECT MARKER Displays a frame line corresponding to the selected aspect ratio. Available settings are Off (preset), Full, 17:9, 16:9, 4:3, 1.85:1, and 2.35:1.
PAGE 13
DISPLAY MODE MENU 1P Displays the incoming video signal on the full screen. 1P is the preset value for display mode. In 1P mode, the display can be rotated to 0°, 90°, 180°, or 270°. See Display Setting Menu below. 2P LR Splits the screen into left and right halves and displays a video signal on each half. 2P PIP Displays the first video signal on the full screen and places the second video signal in a frame within the picture.
PAGE 14
INPUT MENU Select SDI, HDMI 1–4, DVI, and VGA inputs, or Auto mode. When Auto is selected, the monitor scans each input and displays the first input signal it detects. AUDIO MENU VOLUME Adjusts the volume output from 0 (preset) to 100. LEVEL METER When SDI is selected in the Input Menu, an onscreen audio level meter can be set to on or off. AUDIO SOURCE Select Analog or Digital (preset). The audio source should be set to the incoming video signal.
PAGE 15
SYSTEM MENU RESET Resets the monitor to the factory presets. MENU TIME Adjusts the length of time the on-screen menu is displayed. Select from 10 to 60 seconds. The preset value is 10. OSD H POSITION Adjust the horizontal position of the on-screen menu from 0 (flush with the left side of the screen) to 100 (flush with the right side). The preset value is 50. OSD V POSITION Adjust the vertical position of the on-screen menu from 0 (flush with the top of the screen) to 100 (flush with the bottom).
PAGE 16
SUPPORTED RESOLUTIONS AND FRAME RATES HDMI2.0 HDMI1.4 480i (59.94) 480i (59.94) 480i (60) 480i (60) 576i (50) 3G-SDI 525 59.94i 625 50i 576i (50) 720 50p 480p (59.94) 480p (59.94) 720 59.94p 480p (60) 480p (60) 720 60p 576p (50) 576p (50) 720 23.98p 720p (23.98) 720p (23.98) 720 24p 720p (24) 720p (24) 720 25p 720p (25) 720p (25) 720 29.97p 720p (29.97) 720p (29.97) 720 30p 720p (30) 720p (30) 1080 50i 720p (50) 720p (50) 1080 59.94i 720p (59.94) 720p (59.
PAGE 17
VGA DVI-I Resolution Hz Resolution Hz 800×600 56/60/70/72/75 720×480 60 1024×768 50/60/66/70/75 800×600 56/60/72/75 1152×864 60/70/75 1024×768 50/60/66/70/75 1152×900 76 1152×864 60/70/75/76 1280×720 50/60/70/72/75 1280×720 50/60/70/72/75 1280×768 50/60/70/75 1280×768 50/60/70/75 1280×800 60/70/72/75 1280×800 60/70/72/75/85 1280×960 60/70/72/75 1280×960 60/72/75 1280×1024 60/70/72/75/76 1280×1024 60/70/72/75/76 1360×768 60 1360×768 60 1440×900 60/75 1400×1050
PAGE 18
SPECIFICATIONS DISPLAY POWER Panel Type Display Size IPS LCD STV-150-4KH: 15.6 in. (39.6 cm) STV-230-4KH: 23.8 in. (60.5 cm) STV-280-4KH: 28 in. (71.1 cm) Screen Resolution 3840 × 2160 Aspect Ratio 16:9 Viewing Angle STV-150-4KH: 176°/176° (H/V) STV-230-4KH: 178°/178° STV-280-4KH: 170°/160° Touchscreen No Maximum STV-150-4KH: 330 cd/m2 Brightness STV-230-4KH: 300 cd/m2 STV-280-4KH: 300 cd/m2 Contrast Ratio 1000:1 Bit Depth/ STV-150-4KH: 8-Bit (16.
PAGE 19
TROUBLESHOOTING Problem Solution The StudioVision will not turn on. • Make sure that the AC adapter is fully plugged in, and that the AC power source is reliable. • Make sure the V-mount battery is fully charged and properly seated in the V-mount battery plate. The StudioVision is turned on, but • Check whether the color saturation is properly configured. there is only a black and white • Make sure the Check Field mode is disabled. image.
PAGE 20
ONE-YEAR LIMITED WARRANTY This Elvid product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.