Owner`s manual

User’s manual r.0805 EQ45 (EN) www.elyq.com
Page 12/21
¾ DR (Dual rate): defines the
gain percentage gain of the
corresponding control (default
value is 70) .This function can
be applied to CH1, CH2 and
CH4 channels only and it is
enabled by setting the
corresponding switch.
¾ Mode: it represents the radio
transmitter mode according to
different user habit. Please be
careful: changing the mode
can lead to a new hardware
setting of the radio (if any
doubt, please contact ElyQ
customer service center).
¾ Type: defines the helicopter
type. For EQ.45, please select
HELI120.
¾ Thro Cuv: represents the
engine throttle curve, and can
be used to improve the
performance of the model.
Please select NOR for normal
flight mode.
Please select ID for acrobatic flight
mode. The curves are divided in 5
segments, which can be configured
with values between 0% and 100%.
¾ Pitch Cuv: represents the
pitch curve, and can be used
to improve the performance of
the model. Please select NOR
for normal flight mode.
Please select ID for acrobatic flight
mode. The curves are divided in 5
segments, which can be configured
with values between 0% and 100%.
¾ Swash Afr (swashplate
function rate): use to adjust the
range and the direction of the
pitch, aileron and elevator.
CH1, CH2 and CH6
correspond respectively to
aileron, elevator and pitch.
¾ MIX: can be used for channel
mixing.