Operation Manual

- 18 -
You should always carry out a reset, if the ‚second-hand‘ won‘t be in position
„0“ again or every time after changing the battery.
1
Pull out the crown into position 2.
2
By pressing the pusher A you can reset the ‚second-hand‘ of the Chrono-
graph to position „0“.
3
After being back exactly on position „0“, please adjust the time and pull
back the crown into the basic position.
!
Don‘t pull back the crown into the basic position, while the ‚second-hand‘
won‘t be back on position „0“, since the ‚second-hand‘ will take the
moment/position you act like this as his new „0“-position.
Chronograph-Reset
BDA_chrono_allg.indd 18 14.01.14 14:55