User manual

9
EMS-51 User Manual
www.emacoustics.co.uk
Attachment of the YK-51v or YK-51h flying yokes
The YK-51v and YK-51h flying yokes both attach in the same way. Using the supplied M8 hand knobs, align the
mounting holes in the yoke with the mounting points on the enclosure. Ensure that the washers are also used
when fitting the bracket – the flat washer should be in contact with the yoke, and the spring washer will sit
between the flat washer and the locking knob.
Once the desired angle is set, tighten the knobs to lock the position in place.