Use and Care Manual

TECHNICAL FILE
R03.002_22/04/2016
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [e-mail].
Technical information
Emac Complementos S.L. (Spain) [e-mail] // Emac America L.L.C. (FL,USA) [e-mail] // Emac Italia S.R.L. (Italy) [e-mail]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novocanto® Stainless steel
Installation
Page 2 of 2
1
2
3 4
5
Indoors Wall tiling
1. Tile one of the sides of the wall to be tiled. Then, spread a big amount of thin-set mortar on the
other side.
2. Place the prole aligned the corner and press it to let the thin-set mortar pass through the holes
on the anchoring wing.
3. Place tiles along the anchoring wing and continue pressing to get an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the leftover material, remove the protective lm if necessary and let dry.
Cleaning and maintenance
The immediate cleaning of the material after its installation is necessary to avoid that remainings of
mortar, concrete or iron particles from wool or tools could cause corrosion.
For indoor applications, you can use water with detergent or liquid soap to remove dirtiness and
possible ngerprints marked on the surface. In high brightness nishes, you can use a glass cleaner.
There are specic cleaners in the markets for stainless steel which clean the material and reduce
possible stains. Whenever you clean stainless steel, ensure you rinse it well and dry totally to prevent
fogging.
Steel wool or similar products, are not recommended because they could scratch the surface and
create pitting corrosion. Pay special attention while using materials containing chlorides, they are not
indicated because could oxidize the material. Hydrochloric acid or iron products in a long contact with
the material are neither recommended. Do not use cleaners for common steel for the cleaning of
stainless steel.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.