Specification

TECHNICAL DATA SHEET
R03.001_07/09/2022
Novoescuadra MINI
2/3
Installation
Technical features and Tests
Materials
Novoescuadra MINI is a prole made by extrusion of aluminum. The anodizing process improves
the corrosion resistance, mechanical resistance and appearance of proles. It has the quality seal
Qualanod, which guarantees the quality of the process and the resulting proles. This seal regulates
several tests: appearance and color, thickness measurements, sealing and impregnation control,
abrasion resistance, lightfastness, acetic saline chamber and nitric acid immersion.
The lacquered nishes have a high quality and homogeneus surface. The lacquering has the quality
seal Qualicoat, which guarantees the quality of the process and the nal products.
Novoescuadra MINI is a very easy to install prole:
1. First clean the prole and the surface to be installed to guarantee a perfect adhesion without
imperfections.
2. Then, apply adhesive on the inner faces of the prole to facilitate bonding. You can use mounting
adhesive or polyurethane mastic or similar.
3. Align the prole against the surface and keep it pressed until they are bonded.
4. Remove the leftover material, if necessary and let dry.
Cleaning and maintenance
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Alloy: 6063 / T5
EN 755-2
Stress test: 110-130 MPa
Tensile strength: 160-175 MPa
Elongation (%): 8%
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Corrosion resistance: Very good
Appearance and color: Excellent EN 12373-1
Anodizing/lacquering: Qualanod / Qualicoat seal