Installation Guide

R03.001_19/02/2013

TECHNICAL FILE

Novojunta® 3

Novojunta® 3 is a prole for expansion joints made of PVC. It is a

combination of rigid and exible material which allows to absorb

small variations of movement and offer a good resistance, avoiding

pathologies. This prole can be installed both in outdoors and

indoors areas. It is specially designed for thick oorings. This model

is available in several nishes as white, grey, beige, brown and black

color.

General features

Material: PVC

Length: 2,5 m.l. (8ft2in)

Dimensions: h: 6, 8, 10, 12.5, 15 mm.

a: 8 mm.

Packaging: 50 u./box

Finishes:

Page 1 of 3

M.A.:

+ 0,7

-0,7

M.T.A: 1,4

M.A: Movimiento admitido (mm.) M.T.A: Movimiento total admitido (mm.)

Applications

Technical Features and Tests

Fire resistance M2 (NBE-CPI-96)

Abrasion resistance Very good

Working temperature -10ºC / 60ºC

Chemical resistance

Good resistance except to chromic, nitric

and sulphuric concentrated acids and

organic solvents like acetate or toluene.

AIMPLAS

Novojunta® 3 is a solution for expansion joints whose main function is absorbing expansions and

contractions in tiled oorings or walls to avoid the apparition of pathologies. It can be installed vertically

or horizontally both in oorings as in walls.

PAGE 1
TECHNICAL FILE Novojunta® 3 Novojunta® 3 is a profile for expansion joints made of PVC. It is a combination of rigid and flexible material which allows to absorb small variations of movement and offer a good resistance, avoiding pathologies. This profile can be installed both in outdoors and indoors areas. It is specially designed for thick floorings. This model is available in several finishes as white, grey, beige, brown and black color. General features Material: PVC Length: 2,5 m.l.
PAGE 2
TECHNICAL FILE Novojunta® 3 Materials Novojunta® 3 is a profile made by coextrusion of PVC-P (rigid PVC) and PVC-U (flexible PVC). PVC-U allow the profile to absorb expansion and contraction movements from floor and wall tiling where is installed and PVC-P is suitable, due to its rigidity, to the support of the tile. PVC El PVC (polyvinyl chloride), is a polar amorphous thermoplastic polymer highly resistant to abrasion, corrosion and a wide range of chemical products.
PAGE 3
TECHNICAL FILE Novojunta® 3 Cleaning and maintenance You can daily clean the profile with water and common detergents. The correct use of bleach, does not affect it. It is resistant to the most common acids except in concentrated status. It is not recommended the use of organic solvents such as acetate, acetone or toluene. Thanks to its high resistance to many of the chemical products, the PVC products are ideal to be installed in industries with saline environment, oils, etc.