Use and Care Manual

R03.002_27/04/2016
TECHNICAL FILE
Novolistel® 4 Aluminium is a prole made by extrusion of aluminium. The matte silver and mirror
bright nishes have been anodized, improving mainly through this process their corrosion resistance,
mechanical resistance and appearance. The anodized applied has the quality seal Qualanod, which
guarantees the quality of the process and the resulting proles. This seal regulates several tests:
appearance and color, thickness measurements, sealing and impregnation control, abrasion resistance,
lightfastness, acetic saline chamber and nitric acid immersion.
The jupiter silver, jupiter black and wengue nishes have been lacquered, obtaining so a high quality
and homogeneus surface. The lacquering has the quality seal Qualicoat, which guarantees the quality
of the process and the nal products.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
*You can amplify information by consulting the Technical Files of the materials in www.emac.es
1. Spread a big amount of gripping material on the surface to be tiled and tile it up to the approxima-
ted height where you’ll place the listello.
2. Place the tiles in the end of the next row, aligning them with previous tiles. Then place the prole
aligned to them, embedding the xing wing between the wall and the tiles. Press to ensure the
gripping material to pass through the mechanized holes of the xing wing.
3. Place the remaining tiles, pressing softly to achieve an optimal adhesion.
4. Then, continue tiling the wall up to the desired height.
5. Finally, clean the remaining material, remove the protective lm if necessary and let dry.
1. Spread a big amount of gripping material on the surface where you are going to place the prole.
2. Place the prole aligned to the corner and press to make the gripping material pass through the
mechanized holes of the xing wing.
3. Place tiles on the xing wing and press to an optimal adhesion.
4. Continue the wall tiling.
5. Finally, clean the remaining material, remove the protective lm if necessary and let dry.
Aluminium
As listello
As edge protector
Materials
Placement
1
1 2 3 4 5
2
3
4
Page 2 of 4
Novolistel® 4 Aluminium
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.