Installation Guide

ManualsBrandsEmac ManualsFlooringNovolistel 4 Matt Silver 3/8 in. x 98-1/2 in. Aluminum Tile Edging Trim

R03.002_27/04/2016

TECHNICAL FILE

Novolistel® 4 Aluminium

Novolistel® 4 is a modern listello from the range of decorative

listellos of Emac®. Its wide visible side makes it a main element

on the environments where is installed. It is available in natural

color, anodized matt silver or bright silver and the exclusive and an

original lacquered color: wengue. The anodized nishes are suitable

to be installed outdoors.

Technical Features

Applications

Complementary pieces

Novolistel® 4 is a decorative listello for indoors and outdoors in case of anodized nishes.

This listello can be installed vertically or horizontally and threir applications are the following:

Novolistel® 4 Aluminium has a complementary piece available to get a perfect nish.

Model registered as community design

Nº 0504253-0008(4)

Exterior angle. Not available in all the nishes

Technical Features

Page 1 of 4

- As listello.

- As corner protection.

- As ooring separation.

- As stair nosing or worktop nish.

Material:

Anodized aluminium

Lacquered aluminium

Lenght: 8ft2in / 2.5 l.m.

Dimensions: h: 3/8” /10 mm.

h: 1/2” / 12 mm.

a: 1” / 25 mm.

Packaging: 30 u./box

With protective lm.

Finishes:

Alloy: 6063 (AA and ASTM)

L-3441 (UNE 38-301-89)

Fire resistance: M0 (UNE 23-727-90)

Abrasion resistance: Very good

Lightfastness: Excellent

Appearance and color: EN 12373-1

* *

Summary of content (4 pages)

PAGE 1
TECHNICAL FILE Novolistel® 4 Aluminium Novolistel® 4 is a modern listello from the range of decorative listellos of Emac®. Its wide visible side makes it a main element on the environments where is installed. It is available in natural color, anodized matt silver or bright silver and the exclusive and an original lacquered color: wengue. The anodized finishes are suitable to be installed outdoors.
PAGE 2
TECHNICAL FILE Novolistel® 4 Aluminium Materials Aluminium Novolistel® 4 Aluminium is a profile made by extrusion of aluminium. The matte silver and mirror bright finishes have been anodized, improving mainly through this process their corrosion resistance, mechanical resistance and appearance. The anodized applied has the quality seal Qualanod, which guarantees the quality of the process and the resulting profiles.
PAGE 3
TECHNICAL FILE Novolistel® 4 Aluminium As flooring separator 1. Spread a big amount of mortar on the surface to be tiled. 2. Then, place the profile and press it to make the mortar pass through the mechanized holes of the fixing wing. Be sure you also fill out the inside of the profile with mortar to reinforce it. 3. Put a tile on the fixing wing and press to an optimal contact with the gripping material. 4, Repeat the operation placing tiles both sides of the profile until the installation is complete. 5.
PAGE 4
TECHNICAL FILE Novolistel® 4 Aluminium Technical information You can find out more information about the technical features of Emac®’s products by downloading its Technical File in www.emac.es. R03.002_27/04/2016 If you have any query, please contact our Technical Department in tecnico@emac.es. Outdoors Indoors Paving Wall tiling Recyclable Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) info@emac-america.com // Emac Italia S.R.L. (Italy) info@emac-italia.it www.