Installation Guide
FICHA TÉCNICA
R03.004_10/05/2016
Novomat
®
TECHNICAL PRODUCT GUIDE
Novomat® is available with four different heights and two different designs.
3.2. PROFILES
3. FEATURES TECHNICAL MAT NOVOMAT®
The models with 8 or 12 mm height have a larger aluminum visi-
ble side and have a reinforced structure to allow the trafc. These
proles have a visible width of 41 mm, with non-slip sides, and can
be installed both in well as on already nished surfaces (with the
appropriate ramp frame).
They are suitable for areas where there is no well or there is no pos-
sibility to do work. Due to its height are suitable for moderate trafc,
small shop entries, houses...
The models with 15 or 20 mm height have a thinner design, with a
visible side of 27 mm. They have a greater capacity to retain dirt due
to its height, so are suitable for high trafc places such as public
buildings, malls, hospitals or similar projects.
Page 2 of 7
Models with minor height
Models with higher height
The Novomat® entrance mats are available in two different models according to the type of installation.
3.1. TYPE OF INSTALLATION
Installation on surface (slimm range)
These entrance mats are installed on already nished sur-
faces and are perfect for rehabilitation or reform works or
in areas without possibility to make a well.
The mat is supplied with its ramp frame (in option) to
avoid differences in level. You only need to place it on the
desired surface.
Installation in a well
These entrance mats are placed during the work and are
installed ush to the ooring. They have a higher capacity
to retain dirt and are perfect for areas with high trafc.
The perimeter frame (in option) is installed to nish and
protect the edge of the well.