Installation Guide
FICHA TÉCNICA
R03.004_10/05/2016
Novomat
®
TECHNICAL PRODUCT GUIDE
The aluminium proles of Novomat® are connected by a high resis-
tant plastied rubber joint. To avoid a closed system, this joint has
perforations that allow the evacuation of dust and moisture.
This joint allows the easy rolling of the mat and acts as acoustic
isolator and shock absorber. This way avoids the metallic noise that
would be produced when stepping the mat without joint.
The system of Novomat® combines the better features of the open
systems (cable) and the closed ones (rubber).
3.3. TYPE OF JOINT
Novomat® is available with textile carpet nish in range of colors to be installed indoors. For covered outdoors is available with
black rubber. All the nishes can be combined in the same entrance mat under request.
3.4. FINISHES
Black
rubber
Red
carpet
Grey
carpet
Beige
carpet
Tobacco
carpet
Anthracite
carpet
There are complements available in option to get the perfect nish
of the installation of Novomat®.
The perimeter frame, with 2 mm width, is the complement to place
when installing Novomat® in a well. It serves as an edge protector
and can be installed in all Novomat® heights.
For installations on already nished surfaces, it is available the ramp
frame 8 mm height (also, in option, 12 mm height).
3.5. COMPLEMENTS
4. HOW TO CHOOSE THE MOST APPROPRIATE NOVOMAT ENTRANCE MAT?
Page 3 of 7
Perimeter frame
Ramp frame
We initially have to choose the correct model depending on if there is a possibility to make a mat well or, on the contrary, if
there is an already nished ooring to install the entrance mat on it.
If there is a mat well available, we can choose any of the four available heights depending on the height of the well or the most
appropriate model for our project.
If the entrance mat is to be installed on already nished oorings, we recommend the installation of Novomat® 8, though the
model Novomat® 12 can also be installed with its complements.
4.1. TYPE OF INSTALLATION