Installation Guide
FICHA TÉCNICA
R03.004_10/05/2016
Novomat
®
TECHNICAL PRODUCT GUIDE
4.5.2 BIG SIZE ENTRANCE MATS
The maximum length of the proles (width of the mat) is 3 meters. The entrance mats with bigger dimensions are manufac-
tured in several pieces to be assembled with an aluminum plate (supplied).
The width of the prole will be determined by the width of the entrance door. The depth (length of the trafc direction) must
be sized to favor the maximum grade of cleaning for the soles of the shoes. In general, it is recommended to distribute the
pieces so its joint do not coincide with the central area, as it is shown in the drawings below.
CORRECT
entry
Module 1 Module 2 Module 3
INCORRECT
entry
Module 1 Module 2
entry
Module 1 Module 2 Module 3
4.5.3. HOW ARE ADJUSTED THE CUSTOM MADE ENTRANCE MATS?
The Novomat® mats have an ending plate made of aluminum that can be cut to size to adjust the dimensions of the mat in
each case. If the dimensions of the mat coincide with the multiple of the proles, this plate will not be necessary and the mat
will not have it.
This ending prole is made of striated aluminum. It looks like a frame when the mat is installed and due to the striated surfac,
favor the slip resistance value.
Page 6 of 7
6. INSTALLATION
Kit entrance mats
Our standard Novomat® Kit mats have been designed for a quick and easy installation once received the material. All
the complements are delivered cut to size.
- Novomat® Slimm: The ramp-frame is delivered cut to size and with self-adhesive. Unpack the frame, mark its
position in the ooring, remove the adhesive protector and glue the pieces ensuring a perfect miter joint. Then unpack
and unroll the mat and place it so it ts the frame.
- Novomat® 15: The perimeter frame is delivered cut to size for a direct installation. Just unpack the frame, place
it protecting the edge of the well and glue it using mortar or adhesive type polyurethane mastic. Be sure that the ad-
hesive do not protrude over the xing wing. Then, unroll the mat and place it so it ts the frame.
Custom made Novomat®
Our entrance mats Novomat® can be ordered custom made with or without complements. If you order Novomat®
with complements, take into account that its length is 2,5 lm. You will need to cut to miter the proles tting the size of
your mat. Then install the frame following the same steps than Novomat® 15 kit or Novomat® Slimm, unroll the mat
and place it so it ts the frame.
If you need a Novomat® mat without complements, just unpack the mat, unroll it and place it into its position.