Installation Guide

ManualsBrandsEmac ManualsFloor Installation ToolsNovopeldano Maxi Tokyo Sand 1/2 in. x 98-1/2 in. Composite Tile Edging Trim

TECHNICAL FILE

R03.003_02/09/2011

Novopeldaño® MaxiTok-

Applications

Novopeldaño® MaxiTokyo is a prole designed to be installed in the steps of stairs. Its particular visible

side provides a high resistance to slip, helping to fulll with the DB-SUA of the CTE (Spanish Technical

Building Code) by improving the value of slip resistance of the ooring where it is installed.

The installation of Maxi outdoors, would result in a variation of its original color, being signicantly

higher in the range of redish colors. To avoid color variations due to the continuous sun exposure, we

recommend the installation of the Maxi range indoors. For outdoor installations we recommend the

MaxiKenya range, that ahs an excellent weatherability and remains unalterable under sun exposure.

Technical Features and Tests

General Features

Page 1 of 3

Novopeldaño® MaxiTokyo is a stair nosing made of Maxi, an

exclusive raw material of Emac® that belongs to the WPC (Wood

Plastic Composites) family of products. Its texturized face side,

offers a high value of slip resistance certied under tests. This value

helps to fulll with the Spanish Technical Building Code (CTE).

Novopeldaño® MaxiTokyo joins technology, sustainability, beauty

and security in just one product.

Material: Maxi (PVC + Vegetable bers )

Lenght: 1 / 2,5 ml.

Dimensions: h: 3/8” / 1/2” (10,12 mm.)

a: 1-9/16” (40 mm.)

Packaging: 10 u./box

Finishes:

Resistance to chemical

agents

Very good except acetone, chromic acid and sulfu-

ric acid.

Water absorption

Very small absorption, high dimensional stability.

Retains its weight after dry.

Fire reaction M1 Classication

UNE 23.727-90 1R

Abrasion resistance Up to 2200 cycles without variation

UNE EN 438-2:2005

Aptdo. 23

Surface resistance to

staining

Resistance to acetone, coffee 176ºF/80ºC, bitumen,

hydrogen peroxyde 30%, sodium hydroxide 25%.

Acetone: surface degradation and blisters.

Rest: without changing.

Impact resistance

Spring: 34 N

Ball drop: 3,93ft/120 cm. maximum drop /

0,38 in./9,9 mm mark diameter

Cigarette burns Surface degradation

Resistance to humidity-

drying

> 20 cycles

UNE EN 14428

Summary of content (3 pages)

PAGE 1
TECHNICAL FILE Novopeldaño® MaxiTokyo Novopeldaño® MaxiTokyo is a stair nosing made of Maxi, an exclusive raw material of Emac® that belongs to the WPC (Wood Plastic Composites) family of products. Its texturized face side, offers a high value of slip resistance certified under tests. This value helps to fulfill with the Spanish Technical Building Code (CTE). Novopeldaño® MaxiTokyo joins technology, sustainability, beauty and security in just one product.
PAGE 2
TECHNICAL FILE Novopeldaño® MaxiTokyo Slip resistance Very good. See graph below. UNE-ENV 12633:2003 Performance of slip resistance Novopeldaño® MaxiTokyo Clase 3 Clase 2 Clase 1 Clase 0 16 27 * In this graph you can see the comparison between the Rd of the flooring without Novopeldaño® MaxiTokyo and the Rd of the flooring with the profile installed. The different areas that conform different classes have been delimited to see clearly the improvement obtained of Rd and of flooring class.
PAGE 3
TECHNICAL FILE Novopeldaño® MaxiTokyo Placement 1. 2. 3. 4. 5. Spread a big amount of thin-set mortar on the surface of the riser. Place the tile on the riser and press to get an optimal adherence. Then, spread a big amount of thin-set mortar on the tread and align the profile on its vertex so it rests on the riser (Do not let overhang, the leverage may remove the step and the tiles). Then press so the thin-set mortar could pass through the mechanized holes of the anchoring wing.