Product Brochure

TECHNICAL FILE
R03.002_18/11/2015
Prole made of AISI-304 Stainless steel, with T shape, intended to
be placed as a trim in joints between oors. Due to its geometry,
the face side is overlapped in the oor. This avoids to see the groute
below and provides a high decorative value. This prole is available
in natural nish high brightness. It is delivered with protective lm
on its surface, to avoid possible damage in handling and transport.
Novosepara 4
Stainless Steel
Material: Stainless Steel AISI-304
Lenght: 2,5 lm
Dimensions:
h: 11 mm
a: 13 mm
Packaging: 50 u/box
Finishes: High brightness
Applications
Materials
Stainless
Steel
General Features
Page 1 of 2
Novosepara 4 Stainless Steel is a prole intended to be placed as a trim in joints between
oors.
Technical Features and Tests
Corrosion Resistance Salt spray test
+504 hours without change
UNE 112017:92
Fire Resistance M0 (UNE 23-727-90)
UNE 23-727-90
Novosepara 4 Stainless Steel is a prole made of AISI-304 Stainless steel. All material batches are
tested with the chemical composition test to determine that they fulll with the specication of the
alloy. Stainless steel used in the Emac® products has been also tested with salt spray test, exceeding
500 hours of exposition without signs of corrosion.
Stainless steel is a highly durable and resistent material, with an excellent supercial appearance that
does not degrade along the time. The nish available is high brightness. All the nishes are slightly
porous and smooth, making easier the hygiene of the installation.