Installation Guide

R03.001_19/12/2016

TECHNICAL FILE

Novorodapie® Eclipse is a prole made of aluminum to be installed

as a skirting in plasterboard walls. Thanks to its geometry, the prole

protects the bottom edge of the wall, generating an innovative

hollow effect like if the wall was suspended in the air. Its simple

lines, nished with a small curve, create a smooth surface that

avoids the accumulation of dirtiness and makes easy the cleaning.

In addition to be a skirting, this prole can also be a nish the top

of the wall. Optionally a LED strip can be installed in the interior

hollow , providing the prole with a double functionality and a high

decorative value.

Novorodapie® Eclipse

Page 1 of 3

PAGE 1
TECHNICAL FILE R03.001_19/12/2016 Novorodapie® Eclipse Novorodapie® Eclipse is a profile made of aluminum to be installed as a skirting in plasterboard walls. Thanks to its geometry, the profile protects the bottom edge of the wall, generating an innovative hollow effect like if the wall was suspended in the air. Its simple lines, finished with a small curve, create a smooth surface that avoids the accumulation of dirtiness and makes easy the cleaning.
PAGE 2
TECHNICAL FILE Novorodapie® Eclipse General Features Material: Anodized aluminum Length: 2,5 ml Dimensions: a: 13/15 mm h: 70 mm Finishes: Matt silver Applications Novorodapie® Eclipse is a skirting profile made of matt silver anodized aluminium. This skirting has been designed to protect the bottom of plasterboard walls, providing with functionality and a high decorative value. Easy to install by using adhesives.
PAGE 3
TECHNICAL FILE Novorodapie® Eclipse Cleaning and maintenance The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry it to remove the humidity excess. The persistent dirtiness can be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder neutral.