Installation Guide

TECHNICAL FILE

R03.001_09/12/2010

Mini antibacterial scotia with reduced face side, which makes

easier the cleaning of difcult areas and avoids the accumulation

of germs. The technology applied on its surface protects against

harmful organisms such as molds, fungi and bacteria. It is easy to

install and it’s ideal both installations with high levels of hygiene and

cleaning and houses. Available in a range of colours with properties

of microbial control.

Novoescocia® S

with technology of control of microbial deterio-

ration

Material: Aluminium

Lenght: 8ft2in / 2,5 m.l.

Dimensions: h: 3/8”-1/2” / 10, 12 mm.

a: 3/8” / 10 mm.

Packaging: 30 u/box

Finishes: 119 - Antibact. bright white

136 - Antibact. matt white

137 - Antibact. matt beige

120 - Antibact. metallic

138 - Antibact. matt anthracite

Applications

Model registered as a community design

Nº 001673617 - 0001

Complementary pieces

General Features

Page 1 of 3

Scope of Novoescocia® S:

- Corners between wall and kitchen counter

- Perimeters in shower trays or bathtubes

- Wall-oor, wall-wall or wall-ceiling joints, horizontally and vertically

It’s ideal for bathrooms, kitchens, medical consultations, restaurants, etc...

Its design is versatile and is appropriate for homes, ofces, public buildings or installations with high

requirements of hygiene and cleaning.

Exterior angle Interior angle Cover

Novoescocia® S has complementary pieces available ,made in Zamak, to achieve a perfect nish.

PAGE 1
TECHNICAL FILE Novoescocia® S with technology of control of microbial deterioration Mini antibacterial scotia with reduced face side, which makes easier the cleaning of difficult areas and avoids the accumulation of germs. The technology applied on its surface protects against harmful organisms such as molds, fungi and bacteria. It is easy to install and it’s ideal both installations with high levels of hygiene and cleaning and houses. Available in a range of colours with properties of microbial control.
PAGE 2
TECHNICAL FILE Novoescocia® S Materials Aluminium Novoescocia® S is a profile made by extrusion of aluminium. Its coating improves the corrosion resistance and provides properties for control of microbial deterioration. All the finishes have been lacquered, obtaining so a high quality and homogeneus surface. The lacquering has the quality seal Qualicoat, which guarantees the quality of the process and the final products.
PAGE 3
TECHNICAL FILE Novoescocia® S Placement 1. Place tiles on the wall that will support the part of the profile without anchoring wing. 2. Spread a big amount of thin-set mortar on the other surface, without tiles, perpendicular to the first one. 3. Align the profile with the tiling and then press to make the thin-set mortar passes through the holes on the anchoring wing. 4. Place tiles along the anchoring wing and press to achieve an optimal adhesion. 5.