Quick Start Manual
2-1
Setting Up Your System
This chapter describes how to set up and turn on/off your system. Just follow the steps in this
chapter.
Before you set up your computer, it is important to choose a safe and convenient location that
provides the following:
● A large, sturdy desk or table strong enough to support the weight of your system and all of its
components.
● A flat and hard surface. Soft surfaces like beds and carpeted floors attract static electricity, which
can erase data on your disks, damage the computer’s circuitry, and prevent proper ventilation.
● Good air circulation. Leave several inches of space around the computer so air can move freely.
● Moderate environment conditions. Select a cool, dry area and protect your computer from
extremes in temperature, humidity, dust, and smoke. Avoid direct sunlight or any other source of
heat.
● Appropriate power sources. To prevent static charges, connect all your equipment to three-hole,
grounded outlets. You need one outlet for the computer, one for the monitor, and an additional
outlet for a printer and any other peripheral devices.
● No electromagnetic interference. Do not place your system too close to any electrical device, such
as a telephone, which generates an electromagnetic field.
1. Selecting a Location
Chapter 1
Setting Up Your System
Setting Up Your System