Flat Panel Monitor User Guide
Contents Using Your eMachines Flat-Panel Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Unpacking the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Attaching the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connecting cables . . . .
Contents ii
Using Your eMachines Flat-Panel Monitor • • • • • • • • Unpacking the monitor Setting up the monitor Turning on the monitor Adjusting monitor settings Power management Maintaining Troubleshooting Specifications 1
Using Your eMachines Flat-Panel Monitor Unpacking the monitor Your monitor box should contain the following items: • Monitor (with neck attached) • Base (to connect to the neck) • This User Guide • VGA cable • Audio cable (Option) • Power cord If you are missing any items, call Customer Care. Setting up the monitor To set up the monitor, first attach the base, then connect cables.
www.emachines.com Connecting cables To connect video and power cables: 1 Position your computer and the monitor so you can reach the back of each, then connect the blue VGA video cable to the blue VGA video connector under the back of the monitor. 2 Make sure that your computer is turned off, then connect the other end of the video cable to the matching video port on the back of your computer. 3 Connect the power cord to the power connector under the back of the monitor.
Using Your eMachines Flat-Panel Monitor 4 If you want to have your computer’s audio played through your monitor’s speakers, connect the included audio cable to your computer’s headphones or line out jack (usually color-coded green) and to your monitor’s AUDIO jack. (Option) Audio jack 5 Plug the power cord into a correctly grounded (three-prong) AC power outlet. We recommend using a surge protector to protect your monitor from voltage spikes.
www.emachines.com 2 Turn on your computer. After your computer is running, the power LED on the monitor’s power button should be blue. Allow several seconds for the display image to appear. If the power LED is not on or is amber, or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 10. 3 Adjust the tilt of the monitor for the best viewing angle. The monitor can adjust from 15° back to 5° forward.
Using Your eMachines Flat-Panel Monitor On-screen display options Adjusting OSD settings To adjust the OSD settings: 1 Press Auto. The display image is automatically adjusted to the ideal settings for your current screen resolution. 2 Press Menu. The OSD opens. 3 Press < and > to highlight a setting, then press Menu to open the selected menu or setting.
www.emachines.com To set the scenario mode: 1 Press Menu to open the OSD, then press Menu again to select the Brightness and Contrast menu. 2 Press > to highlight Scenario Mode, then press Menu. The Scenario Mode menu opens. 3 Press < and > to highlight a scenario mode, then press Auto to keep the setting. Menu icon Mode Description User User-defined (custom) settings, which can be adjusted to suit your needs.
Using Your eMachines Flat-Panel Monitor Changing Windows screen settings Color depth and screen resolution are two of the most basic monitor settings you may need to change to suit your needs. Color depth is the number of colors your computer uses to display images on your monitor. Most images look best displayed with the maximum number of colors available.
www.emachines.com Power management ENERGY STAR As an ENERGY STAR® Partner, eMachines has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This monitor complies with the EPA’s International ENERGY STAR Program, which is a program designed to encourage manufacturers of computer equipment to build circuitry into their products to reduce energy consumption during time of non-use.
Using Your eMachines Flat-Panel Monitor Maintaining To keep the monitor in optimal working order: • Do not block the ventilation holes. • Do not expose the monitor to rain or use near water. • Keep the monitor away from radiators or heat vents. • Keep the monitor out of direct sunlight. Caution Do not use any type of abrasive pad or glass cleaner. You will permanently scratch the screen. • To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet, screen, and controls.
www.emachines.com • If the power LED is amber: • Make sure that your computer is turned on. • Move the mouse or press any key on the keyboard to bring the monitor out of sleep mode. • Restart your computer with the monitor turned on. • Make sure that the video cable is not damaged. • Check the end of the video cable for any pins that might be bent or pushed in. • Turn off the monitor and unplug the video cable from the back of your computer. Turn the monitor back on and wait for ten seconds.
Using Your eMachines Flat-Panel Monitor • If the image looks stretched or fuzzy, you must adjust the operating system’s display settings • • to match the monitor’s optimal (native) setting. For information on adjusting settings, see “Changing Windows screen settings” on page 8. To find your monitor’s native setting, see “Specifications” on page 13.
www.emachines.com Specifications Specifications are subject to change without notice or obligation. Many products for eMachines are custom engineered by our suppliers to eMachines specifications and may vary from similarly marketed products. Panel size and type E161HQ: 15.6 inch (diagonal) viewable TFT E191HQ/E181H: 18.5 inch (diagonal) viewable TFT E191W: 19.0 inch (diagonal) viewable TFT Pixel resolution E161HQ and E191HQ/E181H: 1366 × 768 (native) E191W: 1440 × 900 (native) Pixel pitch E161HQ: 0.
Using Your eMachines Flat-Panel Monitor Video modes E161HQ Mode Mode name and resolution Horizontal frequency (kHz) Vertical frequency (Hz) 1 VGA 640 × 480 31.469 59.941 2 VGA 640 × 480 37.861 72.809 3 VGA 640 × 480 37.5 75.0 4 MAC 640 × 480 35.0 66.66 5 VESA 720 × 400 31.469 70.087 6 SVGA 800 × 600 35.156 56.25 7 SVGA 800 × 600 37.879 60.317 8 SVGA 800 × 600 48.077 72.188 9 SVGA 800 × 600 46.875 75.0 10 MAC 832 × 624 49.722 74.55 11 XGA 1024 × 768 48.363 60.
Using Your eMachines Flat-Panel Monitor Video modes E191W Mode Mode name and resolution Horizontal frequency (kHz) Vertical frequency (Hz) 1 VGA 640 × 480 31.469 59.941 2 VGA 640 × 480 37.861 72.809 3 VGA 640 × 480 37.5 75.0 4 MAC 640 × 480 35.0 66.66 5 VESA 720 × 400 31.469 70.087 6 SVGA 800 × 600 35.156 56.25 7 SVGA 800 × 600 37.879 60.317 8 SVGA 800 × 600 48.077 72.188 9 SVGA 800 × 600 46.875 75.0 10 MAC 832 × 624 49.722 74.55 11 XGA 1024 × 768 48.363 60.
Safety, Regulatory, and Legal Notices • • • • Important safety information Environmental information Regulatory compliance statements Notices 15
Safety, Regulatory, and Legal Notices Important safety information Warning Always follow these instructions to help guard against personal injury and damage to your product. Warning Do not use eMachines products in areas classified as hazardous locations. Such areas include patient care areas of medical and dental facilities, oxygen-laden environments, or industrial facilities. Your eMachines product is designed and tested to meet the latest standards for safety of information technology equipment.
www.emachines.com Environmental information Recycling Mercury Warning Hg Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state, or federal laws. The product you have purchased contains extracted natural resources that have been used in the manufacturing process. This product may contain substances known to be hazardous to the environment or to human health.
Safety, Regulatory, and Legal Notices FCC declaration of conformity Responsible party: Gateway, Inc. 7565 Irvine Center Drive Irvine, CA 92618 USA This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
www.emachines.com European Union Declaration of Conformity We, Gateway, Inc. 7565 Irvine Center Drive, Irvine, CA 92618 Contact Person: Mr. Easy Lai Tel: 886-2-8691-3089 Fax: 886-2-8691-3120 E-mail: easy_lai@acer.com.
Safety, Regulatory, and Legal Notices 20
MAN E161HQ/E191HQ/E191W GDE R0 6/08
