Owner's Manual

Replacing the rear fan
www.emachines.com
165
11 Slide the hard drive bay back into position, then secure it to the case using
the screw you removed previously.
12 Replace the side panel by following the instructions in “Replacing the side
panel” on page 157.
Replacing the rear fan
Tips & Tricks
You need a Phillips screwdriver to add or
replace a rear fan.
To replace the rear fan:
1 Remove the side panel by following the instructions in “Removing the side
panel” on page 154.
2 Disconnect the fan power cable from the system board.
3 Remove the four screws that secure the rear cooling fan to the case.
4 Remove the fan from the case.
Screws