User guide
Table Of Contents
- Using Your eMachines Flat-Panel Monitor
- Unpacking the monitor
- Connecting the monitor
- Starting the monitor
- Adjusting monitor settings
- Power management
- Maintaining
- Troubleshooting
- No power
- No picture
- Display colors are wrong
- Picture has shadows or “ghosts”
- Color is not uniform
- Image is not sized or centered correctly
- The image remains after switching off the monitor
- The image is unstable
- The message “No Input Signal” appears on the screen
- The monitor has pixels that are always dark or too bright
- Specifications
- Safety, Regulatory, and Legal Notices
Using Your eMachines Flat-Panel Monitor
12
Power management
ENERGY STAR
As an ENERGY STAR
®
Partner, eMachines has determined that this product meets the ENERGY STAR
guidelines for energy efficiency.
This monitor complies with the EPA’s International ENERGY STAR Program, which is a program
designed to encourage manufacturers of computer equipment to build circuitry into their products
to reduce energy consumption during time of non-use.
Energy declaration
When connected to a computer that supports the VESA Display Power Management Signaling
(DPMS) Protocol, the monitor can conserve significant energy by reducing power consumption
during periods of non-use. When your computer goes into the energy saving mode, the monitor
enters the Active Off mode (sleep). In the Active Off mode the Power LED turns orange.
Use these conventions and the power can be reduced to the following levels:
To “wake” the monitor when it is in Active Off mode, move the mouse or press any keyboard key.
Access the power management options in the Control Panel to change the period of time after
which the monitor enters these low power states.
VESA state LED indicator Power consumption
On Green < 55 W
Active Off Orange < 2W