Certifications 2

Safety Data Sheet
EMAG AG
according to Regulation (EC) No 1907/2006
Revision date: 05.07.2018
EM-070 Dentalreiniger
Product code: 00320-0092-GHS
Page 4 of 10
Use only in well-ventilated areas.
No special protective measures against fire required.
Advice on protection against fire and explosion
7.2. Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry, cool and well-ventilated place.
Do not use metal containers.
Requirements for storage rooms and vessels
Incompatible with bases.
Advice on storage compatibility
Keep away from food, drink and animal feeding stuffs.
Further information on storage conditions
7.3. Specific end use(s)
Cleaning agent
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits (EH40)
Categoryfibres/mlmg/m³ppmSubstanceCAS No Origin
TWA (8 h)-Orthophosphoric acid7664-38-2 1 WEL
STEL (15 min)- 2 WEL
TWA (8 h)-Propane-1,2-diol, particulates57-55-6 10 WEL
STEL (15 min)- - WEL
8.2. Exposure controls
Ensure adequate ventilation, especially in confined areas.
Appropriate engineering controls
Wash hands before breaks and immediately after handling the product .
When using do not eat, drink or smoke.
Take off immediately all contaminated clothing.
Avoid contact with skin, eyes and clothing.
Protective and hygiene measures
Tightly fitting goggles (EN 166).
Eye wash bottle with pure water (EN 15154).
Eye/face protection
Chemical-resistant gloves (EN 374).
(recommended: minimum protection index 2, corresponding to a permeation rate > 30 minutes according to EN
374)
Butyl rubber - Butyl (0,5 mm)
Fluoro-rubber - FKM (0.4 mm)
This recommendation refers exclusively to the chemical compatibility and the lab test conforming to EN 374
carried out under lab conditions.
Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the
recommendations given by the manufacturer of protective gloves.
Hand protection
Long sleeved clothing
Skin protection
Revision No: 3,0 GB - EN Print date: 16.08.2018