Safety data sheet

SAFETY DATA SHEET (REGULATION (EC) n° 1907/2006 - REACH)
Version : N°1 (20/05/2015)
Date : 20/05/2015 Page 7/14
Revision : N°6 (20/05/2015)
EM-300 Ultraschallreiniger
- Made under licence of European Label System® MSDS software from InfoDyne - http://www.infodyne.fr -
Environmental compartment: Waste water treatment plant.
PNEC : 0.83 g/l
8.2. Exposure controls
Personal protection measures, such as personal protective equipment
Use personal protective equipment that is clean and has been properly maintained.
Store personal protective equipment in a clean place, away from the work area.
Never eat, drink or smoke during use. Remove and wash contaminated clothing before re-using. Ensure that there is adequate
ventilation, especially in confined areas.
- Eye / face protection
Avoid contact with eyes.
Use eye protectors designed to protect against liquid splashes
Before handling, wear safety goggles with protective sides accordance with standard EN166.
In the event of high danger, protect the face with a face shield.
Prescription glasses are not considered as protection.
Individuals wearing contact lenses should wear prescription glasses during work where they may be exposed to irritant
vapours.
Provide eyewash stations in facilities where the product is handled constantly.
- Hand protection
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374.
Gloves must be selected according to the application and duration of use at the workstation.
Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products
that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.
Type of gloves recommended :
- Butyl Rubber (Isobutylene-isoprene copolymer)
- Natural latex
- PVA (Polyvinyl alcohol)
Recommended properties :
- Impervious gloves in accordance with standard EN374
- Body protection
Avoid skin contact.
Wear suitable protective clothing.
Suitable type of protective clothing :
In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with
EN14605 to prevent skin contact.
In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034 to
prevent skin contact.
Wear suitable protective clothing and, in particular, an apron and boots. These items of clothing shall be maintained in good
condition and cleaned after use.
Suitable type of protective boots :
In the event of minor spatter, wear protective boots or half-boots against chemical risks in accordance with standard
EN13832-2.
In the event of prolonged contact, wear boots or half-boots with liquid-chemical-resistant and waterproof soles and uppers in
accordance with standard EN13832-3.
Work clothing worn by personnel shall be laundered regularly.
After contact with the product, all parts of the body that have been soiled must be washed.
- Respiratory protection
Anti-gas and vapour filter(s) (Combined filters) in accordance with standard EN14387 :
- A1 (Brown)