Installation manual

ManualsBrandsEmatic ManualsAV AccessoriesMobile TV Stand and Mount

6. Cable Management

TV Stand

200x200

300x300

400x200

400x400

600x400

EMW1021

70"

MAX

ISSUED: JAN. 2013

Flat Panel Mobile Cart

CAUTION : DO NOT EXCEED RATED

LISTED WEIGHT CAPACITY. SERIOUS

INJURY OR PROPERTY DAMAGE MAY

OCCUR!

INSTALLATION MANUAL

Run the cable through the columns using cable management holes.

Maintenance

• Check that the bracket is secure and safe to use at regular intervals(at least every three months).

• Please contact your dealer if you have any questions.

+ °

3°

Screen level adjustment: -3°~+3°

70kg

(154lbs)

RATED

70kg

(154lbs)

RATED

TVTV DVDDVD

8kg

(17.6lbs)

RATED

8kg

(17.6lbs)

RATED

Summary of content (4 pages)

PAGE 1
INSTALLATION MANUAL Flat Panel Mobile Cart 6. Cable Management +3° Screen level adjustment: -3°~+3° -3° CAUTION: DO NOT EXCEED RATED LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! Run the cable through the columns using cable management holes. EMW1021 Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your dealer if you have any questions.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. Component Checklist IMPORTANT: Ensure you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this installation sheet.
PAGE 3
1. Attaching the Base to the Column 2. Installing the Shelf Bracket and the Universal Plate G H Use tool to loosen the screws in order to separate the shelf bracket. Re-attach the shelf bracket to the columns at the desired position and secure it using (just removed) screws. E B C Attach the base to the bottom of columns using appropriate screws and washers, tighten screws with Allen key.
PAGE 4
3. Installing the Glass Shelf 4-2 For Recessed Back Screen or to Access A/V Inputs TV TV TV TV TV TV P-D P-E M-C M-F Attach the glass shelf to the shelf bracket using the screw and the plastic bush. Tighten the screw with a proper phillips screwdriver. or M-G M-C M-D M-E M-F M-D M-E M-D M-E M-F or M-G M-G M-F or M-H M-G M-H Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.