Owners manual

3
Operating Instructions
Description
Electric start
Intercooler
Gas tank
Head unloader valve
Ball valve (Air outlet)
Air receiver / Tank
Tank drain valve
Oil site glass
Pressure gauge
Tank anchor bolt location (4, typ.)
Raised
motor mounting
plate
Engine start
pull cord
Check valve
Air filter
Unit configuration and appearance varies by model.
Callouts are for general identification.
Safety
This manual contains very important information to
know and understand. This is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS. To help un-
derstand this information, observe the following:
Danger indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not
avoided, could result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not
avoided, may result in minor or moderate injury.
Notice indicates important infor-
mation, that if not followed, may
cause damage to equipment.
MANUAL
Read all manuals included with this
product carefully. Be thoroughly
familiar with the controls and the
proper use of the equipment.
Basic Guidelines
1. Allow only trained, authorized persons who
have read and understood these operating
instructions to use this compressor. Failure
to follow the instructions, procedures and
safety precautions in this manual can result
in accidents and injuries.
2. NEVER start or operate the compressor under
unsafe conditions. Tag the compressor,
disconnect and lock out all power to it to
prevent accidental start-up until the condi-
tion is corrected.
3. Install, use and operate the compressor only
in full compliance with all pertinent OSHA
regulations and all applicable Federal, State
& Local Codes, standards and regulations.
4. NEVER modify the compressor and/or controls
in any way.
5. Keep a first aid kit in a convenient place.
Seek medical assistance promptly in case
of injury. Avoid infection by caring for any
small cuts and burns promptly.