Babyhawk R Manual

VTX frequency chart
1.Entry / Exit menu
(1)Press 5 seconds to enter menu.
(2)Press 5 seconds again to exit menu.
2.Selection menu
After entering the menu,click the button to switch the band(R)/channel(C)/power(P).
3.Entry / Exit parameters
(1)After selecting the menu, press 2 seconds to enter the parameter selection.
(2)Press 2 seconds again to exit the parameter selection and go back to the menu
option.
(3)Press 5 seconds to exit menu directly.
4.Selection parameter
When you enter the parameter, click the button to select parameters.